New Era Trading Co
Takiya , Nagpur, Maharashtra
Send E-mail
Send SMS
Home  » Our Products  » 

Nitoflor Chemical


Our product range includes a wide range of nitoflor chemical std and nitoflor chemical.

REQUEST CALLBACK
Uses:

  • Nitoflor Chemical Std. provide a highly abrasion resistant surface to concrete floors by the dry shake- on method which ensures that the hard wearing surface bonds monotonically to the base concrete
  • They are ideally suited for all industrial areas subject to the heaviest traffic, e.g. loading bays, trucking lanes, car parks, workshops, machine shops, ramps and spillways

Features:

  • Non metallic does not rust or stain
  • Provides a hard, abrasion resistant surface
  • Forms monolithic bond with base concrete
  • Easy and economical to apply

Description:

  • Nitoflor Chemical Std. are quality controlled, factory blended powder which are ready to use on site
  • They contain special hard wearing aggregates which have been selected for abrasion and wear resistant properties as well as shape and size
  • These latter considerations, together with the use of high performance workability admixtures, produces a material which is easy to trowel into the surface of fresh, wet concrete
  • Nitoflor Chemical Std. cure monotonically to provide a dense, non-porous surface which is extremely hard wearing and abrasion resistant
  • Monolithic cure ensures that problems normally associated with thin 'granolithic' screeds, viz., shrinkage, cracking, etc., are completely overcome
  • Being non-metallic, Nitoflor Chemical Std. provide a non-slip surface which will never rust and disintegrate

Technical support:

  • Fosroc offers a technical service to specifiers, end users and contractors, as well as on-site technical assistance in locations all over the country

Properties:

  • Abrasion resistance ( IS : 1237 - 1980) Nitoflor Chemical Std. have been tested as per IS:1237 - 1980 against control concrete for abrasion resistance
  • Test results showed that Nitoflor Chemical Std. improves the abrasion resistance of concrete by 225% and Nitoflor Chemical Std. by 150% when tested as per guidelines in IS:1237 - 1980


Additional Information:
  • Item Code: HT-HT
  • Minimum Order Quantity: 25 Kilogram

Approx. Rs 940 / Kilogram
Yes! I am Interested
View PDF


REQUEST CALLBACK
Uses:

  • Engineering plants
  • Cold Storage areas
  • Freezer rooms
  • Commercial Kitchens
  • Floors in warehouses
  • Garages
  • Pharmaceutical industries and medical laboratories
  • Light industrial and food processing areas
  • Food & Beverage Industries
  • Paper & Pulp industry
  • Textile Production areas

Features:

  • Durable good resistance to abrasion and impact
  • Fast Can be applied on green concrete
  • Damp tolerant no application delays
  • Water miscible safe in use, no odour
  • Longevity Good abrasion and corrosion resistance
  • Attractive available in a range of colours
  • Environment friendly No V.O.C.
  • Cleanliness Can be steam cleaned
  • Resistant to thermal shocks
  • Water vapour permeable
  • Good resistance to a wide range of chemicals
  • Resistance to high temperature working conditions
  • Non tainting

Description:

  • Nitoflor Chemical is a four-component water miscible epoxy screed system, based on new generation epoxy resin technology, supplied in pre-weighed packs ready for on-site mixing and use
  • The cured screed forms a hard, matt and water vapour permeable seal to concrete
  • This permeability allows it to be applied on damp substrates and green concrete



Additional Information:
  • Item Code: TF-5050
  • Minimum Order Quantity: 25 Kilogram

Approx. Rs 940 / Kilogram
Yes! I am Interested
View PDF


REQUEST CALLBACK
Uses:

  • Nitoflor Chemical provides an extremely high strength floor topping with exceptional resistance to surface mechanical wear and attack from chemical spillage. The troweled screed has a safe nonslip finish
  • Nitoflor Chemical is ideally suited for heavy engineering industry, paper and pulp industry, steelworks, breweries, automobile industry, tyre manufacturing industry, warehouses, trucking lanes, loading bays etc
  • In areas where a high degree of cleanliness is required, the surface of Nitoflor Chemical can be sealed with Nitoflor Chemical FC range of floor coatings

Features:

  • Durable exceptional resistance to heavy duty traffic
  • Nonslip good gripping surface to both vehicular and pedestrian traffic
  • Easily laid designed for easy laying to a fair finish
  • Seamless eliminates potential sources of failure
  • Colour range available in different colour combinations

Description:

  • The Nitoflor Chemical, is a three part solvent free combination of epoxy resin, modified amine hardeners filled with specially graded and selected high crushing strength, heavy density aggregates
  • Nitoflor Chemical durable abrasion resistant screed is laid by trowel at 3 to 6 mm thickness depending on the requirement
  • The system includes Nitoflor Chemical 25, two part primer
  • Nitoflor Chemical screed and Nitoprime 25 primer are supplied in preweighed units ready for on site mixing and application
  • The finished, cured floor has a slightly granular texture of uniform colour
  • A two part epoxy sealing coat from Nitoflor Chemical FC range is recommended as a topcoat for Nitoflor Chemical
  • Before application on a steel substrate, shot blasting must first be done to SA 2½ finish and then priming should be done with Nitoprime 28 primer

Technical support:

  • Fosroc provides a technical advisory service supported by a term of specialists in the field


Additional Information:
  • Item Code: TS-5000
  • Minimum Order Quantity: 25 Kilogram

Approx. Rs 940 / Kilogram
Yes! I am Interested
View PDF


 






Corporate Brochure



X

 

 

Send SMS
New Era Trading Co
Shaikh Fakhruddin Fidvi  (Partner)
Ghat Road, Near Vijay Cinema
Takiya , Nagpur - 440018 , Maharashtra , India
Send E-mail