Fosroc Construction Chemical

Backed by the rich experience and a competent team of professionals, we are able to offer Concrete Repair Mortars. The offered range of concrete repair mortars is formulated using premium grade ingredients at reliable vendors' base. In addition to this, the offered range is available under the names of Renderoc, Paveroc, Nitomortar, Nitobond, Patchroc. These cement and resin based products are ideal for reviving or repairing defective concrete.

Features:

• Suitable for both structural or non-structural repair
• Build solutions for high
• Self compacting solutions
• Compatibility with design
• Rapid repair solutions
• Low, medium and high build solutions
• Proven and distinct track record

In order to append and respond to the diverse demands of clients, we are able to offer Surface Treatments. The offered range of surface treatments is sourced from dependable vendors of the market. Along with this, the offered range of surface treatments is checked on different parameters so as to ensure its compliance with the industry laid norms and standards.

Features:

• High compressive strength
• Durable
• Proper binding
• Renders immense strength to the structure

We are able to gain immense expertise in delivering Grouts & Anchors. The offered range of Cement and resin based products is best suited for filling voids beneath load bearing units, together with anchoring systems to equip permanent or removable anchors and fixings. This range of grouts & anchors is checked on different characteristics so as to ensure its compliance with the industry laid norms and standards.

Features:

• Free flow
• Shrinkage compensation in plastic state
• Non metallic iron content
• Prepacked material

We are a leading firm, which is engaged in offering Proactive Coatings. The offered range of proactive coatings is sourced from reliable vendors, who ensure to formulate it in strict compliance with the international quality norms and standards. Along with this, the offered assortment of proactive coatings is ideally utilized for protecting new & existing structures from attack by atmospheric chlorides & carbonation, or from exposure to harmful chemicals.

Features:

• Superior finish
• Durable
• Reliable compressive strength

Specifications:

Our customers can avail Grinding Aids and Performance Enhancers from us. The offered range is formulated utilizing optimum grade ingredients and innovative techniques at dependable vendors' premises. Along with this, the offered range is ideally applicable for grinding clinker and non-hydraulic additives to produce a variety of high quality cements.

Features:

• Reduce specific energy consumption of grinding
• Enhance throughput of the mill
• Lower clinker content in PPC (Portland Pozzolana cement) and PSC (Portland slag cement) to conserve valuable resources
• Reduce pack set
• Promotion of better flow characteristics of cement

Specifications:

In order to append and respond to the diverse demands of clients, we are able to offer Tile Adhesives. These tile adhesives are formulated utilizing high grade ingredients at reliable vendors premises. This range of tile adhesives is known to act as a bonding agent to provide structural integrity. These products are best suited for fixing of tiles on the external floor and internal walls.

Features:

• Improves consistency
• Longer shelf life
• Easy usage
• Non-toxicity

Specifications:

We have gained immense expertise in delivering Joint Sealants and Waterproofing. The offered range of joint sealants and waterproofing is formulated using premium grade ingredients at dependable vendors' base. In addition to this, the offered range of joint sealants and waterproofing is ideally used to act as a seal or fill a gap between two elements in order to accept future movement.

Features:

• Good adhesion to moisture, oil, bitumen
• Resisting to UV and atmospheric exposure
• Resisting against ozone and micro organisms

Specifications:

Keeping in sync with time, we are able to offer products for Industrial Flooring to respectable clients. The offered range of industrial flooring's products is known for improvising the the performance characteristics of both new & old concrete floors. Along with this, the offered range is available in number of compositions in accordance with the diverse demands of respectable clients.

Features:

• Seamless
• Abrasion resistant
• Impact resistant
• Chemical resistant

Floor Hardeners:

We are able to gain immense expertise in delivering Concrete Repair. The offered range of concrete repairs is sourced from trustworthy vendors, who ensure to match it with the highest quality norms and standards. Along with this, the offered range of concrete repairs is widely appreciated in the market for its capability to reinstate defective concrete.

Features:

• Water proofing
• Corrosion inhibition
• Bonding
• Durable
• Wear resistant

We are a renowned name, which is engaged in delivering Construction Chemical Admixtures to respectable clients. The offered range of admixtures is sourced from trusted vendors of the market. This range of admixtures is known for modifying and enhancing the properties of fresh and hardened concrete or mortar. The offered range is checked on various parameters so as to ensure its tandem with the benchmarks of quality.

Features:

• Minimizes water absorption treated concrete/mortar/plaster
• No staining or oily residue
• Durable

Specifications:

In order to cater to the diverse requirements of honorable clients, we are able to offer Norcure Chloride Extraction. The offered range of chloride extractions is ideal for electrochemical extraction of corrosive chloride from concrete. This range is known for reinstating the passivity of steel reinforcement and increase the structural service life. Implementing a regulated current in order to create a safe electric field between the reinforcement in the concrete and a temporary externally mounted anode mesh, chloride extraction is carried out specifically.

Features:

• While the treatment is going on, negatively charged chloride ions are extracted from the concrete utilizing an induced positive/negative field effect
• Electrolysis at the reinforcement surface ensure to form a superior pH environment which repatriates the steel within the effective treatment zone, concurrent to the chloride ion removal process
• Corrosion resistant
• Re-bar within the effective treatment zone is re-passivated

We are an eminent name, which is engaged in delivering Norcure Realkalisation to our clients. The offered range is utilized in electrochemical treatment for reinstating passive layer around steel reinforcing and is considered of non-destructive nature. Handled by the by applying a safe electric current between the reinforcement in the concrete and a temporary, externally mounted anode mesh, the offered range possesses following information.

Features:

• While treatment is going on, an alkaline electrolyte solution is shifted into the concrete by a process of elector-osmosis, incrementing the alkalinity of the cover zone
• In addition to this, electrolysis at the reinforcement surface ensure to form a superior pH environment, which the steel reinforcement
• Restores the alkalinity of carbonated concrete
• Reinstates the passivity of steel reinforcement
• Increases structural service life

Backed by the rich experience and a competent team of professionals, we are able to offer Plastiseal Construction Chemical. The offered range is ideal for sealing joints in flashing, guttering and sheet laps. These products are applicable in irrigation channels, open water retaining structures and an integral part of the waterproofing system. The offered range of flexible rubber-bitumen joint sealant is known for its excellent slump resistance and is applicable in sealing joints in irrigation canals. This range is available in 180 liter drums for application from the drum by similar, air operated pump.

Features:

• Firm flexible weather resistant seal
• Excellent slump resistance
• Excellent immersed adhesion
• Compatible with asphalt or bituminous surfaces
• Unaffected by alkalies or sulphates
• Easily gunned
• Suitable for joints up to 40 mm wide

Design criteria:

• Joint size: Joints should be of a size to enable appropriate usage of Plasticine
• Very narrow joints are not easy to seal suitably and for most usages 10 mm should be taken with least width
• Also, maximum width, which is recommended is 40 mm
• Seal depth of 15 mm is maintained
• The sealing slot widths is processed in accordance with the BS 6093 standards, in order to ensure that the sealant operates within its stated movement capacity (MAF 10% in butt joints)
• The use of primer 3 is always utilized on porous surfaces

Our customers can avail Cebex Construction Chemical from us. The offered range is known for enhancing workability and troweling properties of sand/ cement mortar mixes during application. In order to increment quality of masonry and plastering, the offered range is available in off-white to pale yellow liquid which mixes readily with water in any proportions. These products rely on internationally recognized chemicals and is free from calcium chloride and similar salts.

Features:

• Enhanced moisture retention and bond strength
• Slows down drying out of mortar which remains workable longer
• Ensures superior bond to all surfaces and incorporate ceiling
• Makes mortar crack resistant
• Lessen the drying shrinkage cracks and increments frost resistance in cold climates
• High workability: With harsh sands, makes creamy easy-to-apply mortar
• Increase yield of the same quantity of sand/ cement
• Extra coverage normally exceeds material costs
• Better & safer masonry: Mortar fills joints and is known for robust construction
• Improved look: Mortar cuts cleanly from faces of brick, block or stone work
• Increased productivity: Ensure to render speedy work by easy application of mortar

Properties:

• Chloride content: Nil
• Compatibility with cements: Utilized with any type of Portland, super sulphate, blast furnace or cement
• Setting time: There is no important effect on setting the sand/cement mortars
• Plasticizing action: This range ensures limited microscopic air bubbles that increment cohesion
• This range also renders lubrication to the sane particles in the mix, which further imparts enhanced workability to the mortar
• The air bubbles ensure to handle the cement/water matrix at the contact surfaces resulting in enhanced bond strength
• Frost resistance: Where this is a consideration, that air entrainment appreciably increases the frost resistance of the fully cured mortar and also improves that of fresh mortar, as established by international practice.
• Increased yield: These products ensure the cement particles to disperse uniformly throughout the mix. This enables the particles to blend with their air entrainment property and expanding the volume of the mortar
• Rise in yield for the like quantities of sand & cement ranges between 8% and 18%. This increment rely upon the coarseness or fineness of the sand used
• With typical mixes of 1:3 & 1:4 cement:sand, the cost of Cebex Construction Chemical is recovered easily. A net cost saving is acquired, as a result of the increased yield

We are an eminent name, which is engaged in delivering Conplast Fosroc Construction  at clients' premises. The offered range is known for rendering acceleration of strength gain at early ages and major increments in strength. These products significantly reduces water requirements in a concrete mixture. Along with this, the offered range is best-suited for precast concrete and other high early strength requirements. Ideal for addition and re-dosing if necessary, at point of placing to render short term workability enhancement. This range increments ultimate strengths and reducing concrete permeability. These products are designed by reliable vendors in compliance with BS:5075 Part 3 and ASTM-C- 494 as Type 'A' and 'F'. this range of chloride free super-plasticizing admixture is based on sulphate melamine polymers and is offered as a clear solution which instantly disperses in water. Ensuring the dispersion of fine particles in the concrete mix, the offered range also enables the water content of the concrete to perform more effectively.

Features:

• The proper dosage of Conplast M1 to cater to the diverse requirements should always be found by trials utilizing the material and conditions
• This further enables a complete assessment of the concrete mix and the usage of admixture dosage and mix design
• A starting point for such trials is to use a dosage within the normal typical range of 0.5 to 2 liters/100 kg of contentious material such as PFA, GGBFS and micro-silica

In order to append and respond to the diverse demands of clients, we are able to offer Conplast Modifier. The offered range is best suited for lessening excessive alkalinity of water used for concrete where alkali silica reaction is critical. These products are a combination of additives and are easily mixed with water to give desired properties. In addition to this, the offered range is free from chlorides, sulphates, nitrates.

Dosage:

• Normally 1 to 4 ml/liter of water
• The dosage is ideal for indicative purpose and is variable on the quality of water available at site

Effect on concrete:

• This range does not possesses significant effect on setting times, air entrainment or other mechanical properties of concrete

Packaging:

• Available in 20 & 200 liter drums

Storage:

• At least 6 months in original sealed containers

Precautions:

• Material is slightly acidic in nature
• No special precautions are required

Health & safety:

• Avoid contact with skin
• Rubber gloves and goggles should be worn
• Wash spillages with plenty of water
• Enclosed areas should be well ventilated
• If contact with eyes occur, wash immediately with water and seek medical advice

Fire:

• Non flammable

Additional information:

• Technical data and guidance are rendered on a wide range of admixtures, concreting aids, grouts, repairs and the Nitoflor. Also, we offer a range of industrial flooring systems which includes non metallic floor hardeners, epoxy floor coatings and self leveling floor toppings, epoxy heavy duty abrasion resistant screeds.
• Separate data sheets are available on these products

We are a reckoned name, which is readily engaged in delivering Conplast Fosroc Construction at customers' premises. The offered range is processed utilizing high grade ingredients at reliable vendors' premises. In addition to this, the offered range is available in different compositions and specifications in accordance with the diverse demands of clients. Ensuring the enhancement of effectiveness of the water content of a concrete mix, the offered range is appreciated for rendering effective means of reducing concrete permeability and thereby reducing water penetration.

Features:

• Enables appropriate strength grades to be catered at lessened cement content or incremented workability
• Water reduction importantly enhances compressive strengths at all ages and ensures durability through the production of low permeability concrete
• Lessen the risk of segregation and bleeding
• The offered range aids in the production of a dense, close textured surface and enhancing durability
• Chloride free
• Safe for use in Prestressed and reinforced concrete

Standard compliance:

• This range complies with IS:9103-1999
• These products also comply with IS:2645:2003 as an integral waterproofing compound

Description:

• This range is a chloride free water lessening admixture, which is based on selected sugar-reduced lingo sulphonates
• This range is available as a brown solution which instantly disperses in water
• This range disperses the fine particles in the concrete mix, allowing the water content of the concrete. These products also perform more effectively and enhances the consistency of the concrete
• This forms higher levels of workability for the same water content, enabling advantages such as water reduction and increased strengths to be taken

Technical support:

• Our reliable associates ensure to render a technical advisory service for on-site assistance and advice on admixture selection, evaluation trials and dispensing equipment

Prestressed:

• The proper dosage of Conplast Fosroc Construction to cater to the requirements is tracked by trials utilizing the material and conditions
• This enables the optimization of admixture dosage and mix design
• These products render a complete assessment of the concrete mix
• An initialization for such trials is to utilize a dosage within the specific range of 0.20 to 0.50 liters/100 kg of cement like material, including PFA, GGBFS and micro-silica

• Eucoplacant Chemical is particularly suitable for self compacting concrete applications. It gives excellent stability to hydraulic binder based materials
• Eucoplacant Chemical limits bleeding, segregation and sedimentation of concrete, mortars and grouts
• In particular, it makes possible to manufacture concrete with high fluidity being able to be placed by gravity, without any means of vibration
• The addition of VMA allows to obtain concrete with high quality surface finish, and also allows to remove some of the harmful effects related to the use of mechanical means of placing (noise etc.)

• Eucoplacant Chemical is compatible with all cements meeting ASTM and European standards
• Self compacting concrete and mortars
• Buildings
• Structures
• Precast industrial Grounds
• Concrete and mortars sensitive to segregation and bleeding
• Grouts containing ultra fine binders
• Shells containing highly dense steel reinforcement
• Underwater concrete

• Nature:  Liquid
• Colour:  Brown
• Specific gravity at 20°C: 1.33
• pH:  8.0 - 10.5 @ 270C
• Chloride content: < 0.1 %

• Eucoplacant Chemical can be added into the mixing water or into the wet concrete. The super plasticizer is added simultaneously with the VMA or delayed
• Eucoplacant Chemical is totally compatible with the other admixtures of Fosroc range
• All normal placing processes of the concrete will have to be adapted to ensure delivery of concrete into moulds and form work
• For best result, the concrete mix design must be optimized

• Eucoplacant Chemical is recommended to be used at a dosage of 0.05 to 1.0% by weight of cement depending on the applications
• In order to meet some specific requirements of concrete, the dosage of 721 must always be determined by trials using the materials and conditions that will be encountered on site
• Normally, it depends on the diameter of the coarsest aggregates and the quantity of fine elements lower than 80 microns

• To enable a high build of sprayed concrete, without slump
• To provide set acceleration and reduce rebound

• High build enables faster coverage with minimized slump
• Can be applied up-to 300mm in one application to vertical surfaces and up-to 200mm overhead dependent on weight / volume of aggregate
• Non caustic leads to safer handling / operating conditions
• Low rebound - controlled set allows new material to be embedded in applied mortar
• Chloride free liquid
• 28 days strength not adversely affected

• Sprayset Chemical meets the requirements of ACI 506-56 (recommended practice for short changing - Concrete society
• Specification for Sprayed concrete)

• Sprayset Chemical is a chloride free liquid based on a blend of inorganic powders, which is added to a sprayed concrete mix to impart properties of high build and low rebound. Its pH level is neutral.

• Fosroc provides a technical advisory service for on-site assistance and advise on admixture selection, evaluation trials and dispensing equipment
• Technical data and guidance can be provided for admixtures and other products for use with fresh and hardened concrete

• The optimum dosage for Sprayset Chemical to meet specific requirements should always be determined by trials using the materials and conditions that will be experienced in use
• This allows the optimization of admixture dosage and mix design and provides a complete assessment of the concrete mix
• A starting point for such trials is to use a dosage within the normal typical range of 5.0 litres/100 kg of contentious material, including PFA, GGBFS or micro silica

• Dosages outside the typical range quoted above may be used if necessary and suitable to meet particular mix requirements, provided that adequate supervision is available
• Compliance with requirements must be assessed through trial mixes. Contact Fosroc for advice in these cases

• Sprayset Chemical is used in sprayed concrete, shotcrete and gunite processes where rapid setting is required

• Rapid set allows fast build-up
• Minimum rebound
• Single pass spraying for thick coating
• Excellent for overhead surfaces
• Can be used for ‘wet and dry’ processes
• Non-flammable

• Sprayset Chemical is a chloride free accelerating admixture
• It is supplied as a pale yellow solution which is introduced through the spraying nozzle

• Fosroc provides a technical advisory service for on-site assistance and advise on admixture selection, evaluation trials and dispensing equipment
• Technical data and guidance can be provided for admixtures and other products for use with fresh and hardened concrete

• The optimum dosage for Sprayset Chemical to meet specific requirements should always be determined by trials using the materials and conditions that will be experienced in use
• This allows the optimization of admixture dosage and mix design and provides a complete assessment of the concrete mix
• A starting point for such trials is to use a dosage within the normal typical range of 1.0 to 5.0 litres/100 kg of  material, including PFA, GGBFS or micro silica

• Dosages outside the typical range quoted above may be used if necessary and suitable to meet particular mix requirements, provided that adequate supervision is available
• Compliance with requirements must be assessed through trial mixes
• Contact Fosroc for advice in these cases

• Structuro Chemical is a high performance Superplasticizer intended for applications where increased early and ultimate compressive strengths are required
• Self compacting concrete
• Pumped concrete
• Concrete requiring long workability retention
• High performance concrete

• Increased early and ultimate compressive strengths
• Increased flexural strength
• Higher E modulus
• Improved adhesion to reinforcing and Plasticisers steel
• Better resistance to carbonation
• Lower permeability
• Better resistance to aggressive atmospheric conditions
• Reduced shrinkage and creep
• Increased durability

• Structuro Chemical is differentiated from conventional Superplasticizer in that it is based on a unique carboxylic ether polymer with long lateral chains
• This greatly improves cement dispersion
• At the start of the mixing process an electrostatic dispersion occurs but the cement particle’s capacity to separate and disperse
• This mechanism considerably reduces the water demand in flow able concrete
• Structuro Chemical combines the properties of water reduction and workability retention
• It allows the production of high performance concrete and/or concrete with high workability
• Structuro Chemical is a particularly strong Superplasticizer allowing production of consistent concrete properties around the required dosage

• Fosroc provides a technical advisory service for on-site assistance and advice on mix design, admixture selection, evaluation trials and dispensing equipment

• Structuro Chemical is a high performance Superplasticizer intended for applications where increased early and ultimate compressive strengths are required
• Self compacting concrete
• Pumped concrete
• Concrete requiring long workability retention
• High performance concrete

• Increased early and ultimate compressive strengths
• Increased strength
• Higher E modulus
• Improved adhesion to reinforcing and Superplasticizer steel
• Better resistance to carbonation
• Lower permeability
• Better resistance to aggressive atmospheric conditions
• Reduced shrinkage and creep
• Increased durability

• Structuro Chemical is differentiated from conventional Superplasticizer in that it is based on a unique carboxylic ether polymer with long lateral chains. This greatly improves cement dispersion
• At the start of the mixing process an electrostatic dispersion occurs but the cement particle’s capacity to separate and disperse
• This mechanism considerably reduces the water demand in flow able concrete
• Structuro Chemical combines the properties of water reduction and workability retention. It allows the production of high performance concrete and/or concrete with high workability
• Structuro Chemical is a particularly strong Superplasticizer allowing production of consistent concrete properties around the required dosage

• Fosroc provides a technical advisory service for on-site assistance and advice on mix design, admixture selection, evaluation trials and dispensing equipment

• Self placing concrete
• Buildings
• Constructions
• Prefabrication
• Industrial slabs
• Ultra-fine binder based grout and grout compositions
• Walls with a high density of reinforcement

• Particularly adapted to the production of self-compacting concrete
• Provides hydraulic binder-based material excellent stability, opposes sweating, segregation and sedimentation in treated concrete
• Results in concrete with a high level of fluidity that can be
• poured and placed by gravity avoiding the need of vibration
• For horizontal applications, only a simple 'adjustment' with a beam is necessary
• Results in high quality facing without the nuisances inherent in the use of mechanical means (noise, etc.)

• Fosroc provides a technical advisory service for on site assistance and advice on mix design, admixture selection, evaluation trials and dispensing equipment

• The optimum dosage of Structuro Chemical to meet specific requirements should always be determined by trial mixes using the materials and conditions that will be experienced in use
• This will be dependent on the size of the largest aggregate and the quantity of the mix's fine elements less than 80 microns
• For slabs 1.0 to 4.0 litre /m³
• For vertical application and to obtain a well finished facing 2.0 to 3.0 litre/m³

• Self compacting concrete
• Precast concrete
• Cement floor screeds
• Improved water retention
• Compatible with all Superplasticizer
• To add body to lean concrete mixes and those that contain gap graded aggregation.
• Ultra-fine binder based grout and grout compositions
• Walls with a high density of reinforcement

• Useful in bleed control of concrete mix
• Particularly adapted to the production of self compacting concrete
• Provides hydraulic binder-based material excellent stability, opposes sweating, segregation and sedimentation in treated concrete
• Results in concrete with a high level of fluidity that can be
• poured and placed by gravity avoiding the need of vibration
• For horizontal applications, only a simple 'adjustment' with a beam is necessary
• Results in high quality facing without the nuisances inherent in the use of mechanical means (noise, etc.)

• Fosroc provides a technical advisory service for on site assistance and advice on mix design, admixture selection, evaluation trials and dispensing equipment

• The optimum dosage of Structuro Chemical to meet specific requirements should always be determined by trial mixes using the materials and conditions that will be experienced in use
• This will be dependent on the size of the largest aggregate and the quantity of the mix's fine elements less than 80 microns
• For slabs 1.0 to 4.0 litre /m³
• For vertical application and to obtain a well finished facing 2.0 to 3.0 litre/m³

• Cebex Construction Chemical is an admixture for cementitious grouts where a reduced water/cement ratio and positive expansions are required
• Applications include bed grouting, duct grouting, non-shrink infilling and jointing

• Gaseous expansion system compensates for plastic shrinkage and settlement in properly designed cementitious grout
• Reduced water/cement ratio mixes in the grout mix ensures low permeability and long term durability in service
• Gives grout high fluidity with low water/cement ratio, thus making placement or injection of the grout easy
• No metallic iron content to corrode and cause staining or deterioration due to rust expansion in the grout
• Composition allows high early strength development in grouts, without the use of chlorides

• Cebex Construction Chemical is a suitable pressure grouting admixture complying with BS: 8110 Part 1-1985, Section 8.9.4.6

• Cebex Construction Chemical, a plasticisers expanding grout admixture is supplied as a powder. The material is a combination of a plasticisers agent and a gas producing expansion medium
• The plastisicing agent allows the use of a reduced water/ cement ratio with consequent increased strengths and durability
• The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion

• Fosroc offers a comprehensive range of high performance, high quality concrete repair and construction products
• In addition, Fosroc offers technical support service to specifiers, end-users and contractors, as well as on-site technical assistance in locations all over the country

• Cebex Construction Chemical is an admixture for cement grouts where a reduced water / cement ratio and positive expansion are required
• Applications include bed grouting, duct grouting, non-shrink infilling and jointing

• Hydrogen free expansion system compensates for plastic shrinkage and settlement in properly designed Cementitious grout
• Reduced water / cement ratio in the grout mix ensures low permeability and long term durability in service
• Gives high grout fluidity with low water / cement ratio, thus making placement or injection of the grout easy
• No metallic iron content to corrode and cause staining or deterioration due to rust expansion in the grout
• Composition allows high early strength development in grouts, without the use of chlorides

• Cebex Construction Chemical a Plasticisers and hydrogen free expansion grout admixture is supplied as a powder admixture
• Cebex Construction Chemical allows the use of a reduced water / cement ratio with consequent increased strengths and durability
• The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion
• Fosroc offers a comprehensive range of high performance, high quality concrete repair and construction products In addition
• Fosroc offers technical support service to specifiers, end-users and contractors, as well as on-site technical assistance in locations all over the country

• Chloride content: Nil to BS: 5075
• Compressive strength: The Plasticisers action of Cebex Construction Chemical allows reduction of the water/cement ratio of Cementitious grouts whilst maintaining flow properties. This gives improvement in strength and long term durability when cured under restraint
• Setting Time: Cebex Construction Chemical may slightly retard the setting times of cement based grouts depending on the cement and ambient temperature
• Expansion characteristics: The controlled positive expansion in unset grouts incorporating Cebex 200 overcomes plastic settlement when measured in accordance with ASTM C827. An unrestrained expansion of upto 2% is typical
• Time of expansion: 15 minutes - 2 hours
• Tempertures above 200⁰C may slightly reduce these times
• Compatibility: Cebex 200 is compatible with all types of portland cement. Cebex 200 may be used in mixes containing certain other Fosroc admixtures. Consult Fosroc for further information

• Tiles
• Carpeting
• Vinyl sheeting
• Linoleum
• Rubber and other sheet flooring

• Can be used directly on in situ or precast floors to provide smooth level surface without screening
• Excellent adhesion to prepared substrates
• Quick easy laying and fast hardening
• One pack product - simply mixed with water on site
• Versatile - can be applied in thicknesses of 2mm to 6 mm

• Cemtop Chemical exceeds the UK Building Research Establishment requirements (CP 72/78 and IP 11/84) for Category A floor screeds

• Cemtop Chemical is a blend of specially selected cements, graded aggregates, polymers and set control additives
• It is supplied as a dry, grey powder which requires only the addition of water to produce a smooth free flowing and self leveling material which can be laid to a feather edge
• This provides an ideal fairing material for leveling uneven, in situ or precast concrete floors
• Cemtop Chemical has been carefully formulated to enable it to be applied at temperatures up to 350⁰C

• Where shown on the contract documents, the self smoothing, Cementitious floor compound shall be Cemtop Chemical by Fosroc
• It shall be capable of sustaining foot traffic within 10 to 18 hours, when applied at an ambient temperature of 350⁰C
• It shall further show an indentation of less than 3 mm at 28 days, when tested in accordance with the BRE Screed Test

• The test results below were determined on laboratory specimens and may vary from those obtained under site conditions

• Cemtop Chemical is designed as a thin layer industrial wearing course for use in areas that are subjected to both foot and forklift traffic
• Typical uses are for reinstatement of existing floors or as a final wearing course on new concrete floors where specified floor tolerances have not been achieved or where, for speed of installation, the concrete floor has been left with a tamped finish
• Warehouses
• Light to medium engineering operations
• Car parks

• Rapid application/installation very fast application enables large areas to be installed in a working day
• Rapid strength gain and curing allows speedy access and minimizes disruption and downtime
• Economic more cost effective than equivalent resin based systems
• Simple installation eliminates time consuming and intensive sand cement screeds
• Stable can be installed in large joint less areas.
• Versatile can be applied on floors subject to rising damp
• Consistent performance single pack eliminates need for site batching and ensures consistency of mixed product
• Self leveling minimal finishing required

• Cemtop Chemical is a blend of selected cements, hard-wearing graded aggregates modified with polymers and flow agents
• It is supplied as a dry, grey powder which requires only the addition of water to produce a self smoothing, free flowing material
• Cemtop Chemical may be applied by hand or by use of a continuous mixer pump

• For fixing of fully grouted steel rock bolts or wooden dowels for strata control in tunnelling and mining to minimise fall of roof and as support system

• Reliability Laboratory controlled prepacked materials eliminate all problems of controlling grout mixing underground and thus minimise risk in achieving a full column grouted bolt or dowel
• Encapsulated Grout pumping totally eliminated. Allows cost saving in labour and equipment
• Non-shrink Expansion agents counteract shrinkage and ensure effective contact
• Chloride free Early strength development without the use of chlorides. Safe in use with embedded steel
• Thixotropic Minimises grout loss from overhead holes or under conditions of running water
• Choice Fast, Medium and slow set capsules available to meet strength development requirements in each situation

• Conbextra Capsule is supplied as a ready to use dry powder encapsulated in a perforated skin, available in three grades - Fast, Medium and slow set
• When required for use the capsule is submerged in water to allow sufficient water to be absorbed through the perforations to form a non-shrink, thixotropic cementitious grout
• Additives in the grout impart controlled expansion characteristics, stabilise the grout and control the water uptake to ensure an optimum water powder ratio for high early strengths
• The overall cohesiveness of the grout allows it to be used in wet conditions or even in moving water without excessive grout washout

• The company provides a technical advisory services supported by a team of specialists in the field

• Effect of temperature grout is nonflammable and will provide satisfactory anchorage up to 200⁰C
• Toxicity: Product is non-toxic

• As a spray applied membrane to retain moisture in concrete for effective curing
• Suitable for all general concrete applications and of particular benefit for large area concrete surfaces, such as airport runways, roads and bridgework's

• Improved curing of concrete enhances cement hydration and provides a more durable concrete
• Control of moisture loss improves surface quality, reducing permeability, producing a hard-wearing, dust free surface and minimizing potential for surface cracking and shrinkage
• Light reflective grades minimize solar temperature gain
• Spray application reduces costs and eliminates the need for alternative curing systems

• Concure Chemical concrete curing compound is polymer based continuous film forming curing compound and is supplied in various pigmented grades
• Clear: Straw liquid curing to a clear film
• Blue: As clear grade but with blue fugitive dye
• Specific Gravity: 0.82 - 0.85
• When first applied to a fresh cementitious surface the product forms a continuous, non-penetrating coating
• This coating dries to a form a continuous film which provides a barrier to moisture loss ensuring more efficient cement hydration, improved durability and reduced shrinkage

• Fosroc provides a technical advisory service to specifiers, end-users and contractors as well as on-site technical assistance in locations all over the country

• All grades of Concure Chemical give 90% or greater curing efficiency when tested to BS 7542-1992

• As a spray applied membrane to retain moisture in concrete for effective curing
• Suitable for all general concreting applications and of particular benefit for large area concrete surfaces, such as airport runways, roads and bridgework

• Improved curing of concrete enhances cement hydration and provides a more durable concrete
• Control of moisture loss improves surface quality, reducing permeability, producing a hard-wearing, dust free surface and minimizing potential for surface cracking and shrinkage
• Light reflective grades minimize solar temperature gain
• Spray application reduces labour costs and eliminates the need for alternative curing systems

• Concure Chemical concrete curing compound is polymer based continuous film forming curing compound and is supplied as aluminum polymeric resin solution drying to a silver film on application
• Specific Gravity: 0.81 - 0.83
• When first applied to a fresh surface the product forms a continuous, non-penetrating coating
• This coating dries to a form a continuous film which provides a barrier to moisture loss ensuring more efficient cement hydration, improved durability and reduced shrinkage
• The aluminum grades contain aluminum flakes to meet specifications for reduction of solar temperature gain

• Fosroc provides a technical advisory service to specifiers, end-users and contractors as well as on-site technical assistance in locations all over the country

• All grades of Concure Chemical give 90% or greater curing efficiency when tested to BS 7542-1992

• For spraying on freshly cast concrete, or newly exposed concrete surfaces after removal of form work, to form a temporary membrane which will retain sufficient moisture for effective curing to take place
• Used for concreting generally but especially useful for large areas of concrete such as pavements, runways and bridge decks; also for vertical or sloping surfaces as on towers, chimneys, canal linings, columns and beams, where water curing is difficult or unreliable

• Single application: Forms moisture barrier for whole of the curing period
• No other curing necessary: Eliminates use of water, hessian or sand, completely
• Reliable: No risk of erratic or poor curing and ensures that cement hydrates efficiently
• Ensures hard-wearing surface: Minimizes risk of drying shrinkage, cracks and dusty surfaces
• Easy and safe spray application: Non-toxic and nonflammable

• Curing efficiency: Concure Chemical curing agent complies with the internationally recognized ASTM C309-90 standard

• Concure Chemical is a white, low viscosity wax emulsion which incorporates a special alkali reactive emulsion breaking system
• This system ensures that the emulsion breaks down to form a non penetrating continuous film immediately upon contact with a Concure Chemical surface
• This impervious film prevents excessive water evaporation which in turn permits more efficient cement hydration, thus reducing shrinkage and increasing durability
• Once formed, the membrane will remain on the concrete surface until eventually broken down and eroded by natural weathering
• Where it is required to apply a further treatment to such concrete surface, it may be necessary to remove the membrane remaining after curing by wire brushing or other mechanical means

• For the removal of mortar and plaster runs, droppings and stains from brickwork and concrete surfaces.
• Removal of hardened concrete from tools, machinery and equipment, or rust and mill scale from steelwork.

• Rapid concrete etching action
• No corrosive action with glass, plastic, rubber and most base metals
• Cleans hardened concrete from tools and mechanical equipment

• Fosroc Acid Etch concrete remover, cleaning and etching agent, is a combination of acid based material, corrosion inhibitors and dispersing agents and is supplied as a clear green solution

• Specific gravity:  Typically 1.08 at 20°C

• Cleaning brickwork and rust stains from concrete A small trial area should be cleaned first to determine the most suitable Fosroc Acid Etch dilution
• re-wet the surface, then, using a sponge, rub the affected areas with a solution of Fosroc Acid Etch and water
• Strength of the solution required will vary but should be between 1:1 and 1:4 (by volume) Fosroc Acid Etch to water
• When the action has finished, wash down thoroughly with clean water. As treatment with Fosroc Acid Etch can alter the surface finish of concrete, the minimum concentration necessary for effective removal of stains should be employed
• The surface should be washed down with water immediately treatment is complete

• Fosroc Acid Etch should be liberally applied to the deposits by a soft broom and allowed to soak overnight if possible
• If the surfaces of the deposit can be cracked by mechanical means this will speed up the operation
• In severe cases more than one application may be necessary. On completion, dissolved deposits and loose material should be brushed and washed away with clean water

• Lokfix Chemical are used for high strength corrosion resistant anchoring of bolts and bars from 12 - 51mm diameter into concrete, rock, masonry or brickwork where high speed of installation and early application of load is required
• Permanent installation of reinforcement starter bars, foundation bolts, base plates, balustrade, barriers and safety fences, railway tracks, tie-back anchors, reinforcement doweling abutments, ground anchors for towers, cranes, dock sills

• Rapid strength gain
• Vibration resistant
• Corrosion resistant
• Non expansive
• Can be placed under water

• BS 4551
• BS5080
• BS2782

• The three versions of Lokfix Chemical polyester resin grout are all pre- measured, two part, filled polyester resin grouts
• Hardening the grout produces anchorages of consistent reproducible values

• Lokfix L (Large aggregate)
• Lokfix S (Small aggregate)
• Lokfix P (Pump able grade)
• Lokfix L is used where hole diameter exceeds bar diameter by 25 to 50mm
• Lokfix S is used where the difference between the hole diameter and bar diameter is < 25mm
• Lokfix P is used in overhead or horizontal holes where bar / hole relationship conforms to Lokfix Chemical polyester resin grout S
• The thixotropic nature of Lokfix Chemical polyester resin grout P reduces flow of grout out of the hole

• Fosroc offers a comprehensive range of high performance, high quality concrete repair and construction products
• In addition, Fosroc offers technical support service to specifiers, end-users and contractors, as well as on-site technical assistance in locations all over the country

• Provides chemical and abrasion resistance to prevent corrosion of concrete surfaces for applications such as
• Seawater tanks, channels and intakes
• Manhole linings
• Sewage works and effluent plants
• Chemical processing
• Foundation waterproofing
• Jetties, piers and docks

• Low cost service life excellent chemical and abrasion resistance, does not support bacterial growth.
• Cost saving primer less system
• Added value system acts as an impermeable waterproof coating
• Versatile usage can be applied to green concrete by brush, roller or spray

• Nitocote Chemical is based on solvent-free epoxy resins, modified with coal tar. It is supplied as a two pack material in pre- weighed quantities ready for on-site mixing and use
• Nitocote Chemical is applied as a two coat application. It is generally applied at a wet film thickness of 200 micron per coat, but can be applied at greater thicknesses to suit exposure conditions
• Nitocote Chemical is available in marine grade for applications necessitating and micro-bio static effect

• The corrosion resistant coating shall be Nitocote Chemical, a coal tar extended, 100% solids, epoxy resin coating
• The coating shall possess a high-build capability, to facilitate varying application thicknesses
• It shall further possess excellent bond and chemical resistance properties and shall comply to BS 7542 & ASTM C309 curing efficiency standards

• For filling blow holes, making good slightly damaged concrete, eliminating minor irregularities on floors and walls prior to applying Nitoflor and Nitocote epoxy coatings

• Easy to apply and finish
• Consistency can be adjusted by varying the filler content
• Non-slump, can be applied to vertical surfaces and trowelled into blow holes
• Reduces consumption of subsequent coatings
• Chemical resistant
• Good adhesion to concrete and steel surfaces
• Cures without shrinkage
• Available in a wide range of colors

• Nitocote Chemical is a thixotropic, solvent free, three component compound based on epoxy resins, graded fillers and thixotropic agents
• It is applied directly to concrete for filling cracks, blow holes etc., which cures to a surface ready for subsequent coatings

• Fosroc offers a technical support service to specifiers, end users and contractors, as well as on-site technical assistance in locations all over the country

• Nitoflor ET Slurry system provides a lightweight, yet extremely hard wearing anti-skid surface to a variety of substrates including steel, concrete, and timber
• Ideally suited for foot and road bridges, RO link spans, helicopter decks, work platforms, ships decks, car parks, walkways, wet work industrial areas etc.
• Special non-spark formulations and low flame spread make
• Nitoflor ET Slurry system especially suitable for offshore oil platforms

• Lightweight:  important in design consideration of bridges and while overlaying on old structures
• Hard-wearing:  proven ability to withstand the heaviest wear in locations around the world
• Durable: excellent tensile, flexural strengths and good impact resistance
• Excellent adhesion: to prepared steel surfaces and primed concrete substrates
• Resilient: reduces wear and tear to vehicle and enhances riding comfort
• Non-slip:  Excellent grip even when wet
• Non reactive: Chemically resistant to oils, greases, hydraulic fluids and many other chemicals.
• Waterproof:  Excellent corrosion protection to steel and concrete substrates
• Spark resistant: Zero spread of flame

• Nitoflor ET Slurry, a three component system is based on coal tar modified epoxy resins, amine curing agents and chemically inert, graded silica fillers which when mixed forms a fluid, homogenous slurry
• The components of Nitoflor ET Slurry system are supplied in preweighed quantities ready to use on site

• Nitoflor Conductive Plus system has been designed for use in areas where a highly static conductive floor is required as a measure to control static electricity
• They provide a dense, impervious, coloured and chemical resistant floor surface which is hygienic and easy to clean
• Typical areas of use include electronics manufacture and assembly, clean rooms, computer rooms, hazardous dust and chemical environments and hospital operating theaters

• Static control provides effective charge dissipation
• Hygienic provides a dense, impervious seamless floor surface which is easily cleaned
• Durable good abrasion resistance
• Aesthetic available in a wide range of colours to enhance the working environment
• Chemical resistance good resistance to a wide range of chemicals

• Nitoflor Conductive Plus system consists of blended epoxy resins, curing agents, graded inert aggregates
• It is a flow applied floor topping for use at a thickness of 2mm
• When laid Nitoflor SL Conductive Plus system provides a seamless, smooth, light reflective surface

• 1 coat of Nitoprime 25
• 1 layer of Nitoflor Conductive Plus Undercoat
• 1 layer of Nitoflor Conductive Plus Topcoat

• Fosroc offers a technical support service to specifiers, end users and contractors, as well as on-site technical assistance in locations all over the country

• Nitoflor Uragard is designed for application as a self leveling floor for concrete and other substrates. This system offers high resistance against impact, thermal shock, abrasion and chemicals
• Resistance to several organic chemicals used in the food industry makes the system suitable for use in various food processing industries
• Freezer rooms
• Refrigerated stores
• Meat, poultry and fish processing plants
• Bakeries & confectionery industries
• Pharmaceutical industries
• Textile manufacturing areas

• Excellent mechanical properties
• High impact and abrasion resistance
• Resistant to thermal shock
• Resistant to intermittent live steam or hot water cleaning
• Good resistance to a wide range of chemicals
• Unaffected by freeze/thaw cycles

• Nitoflor Uragard is a polyurethane based self leveling system designed for application depth of 6mm or greater
• The system is formulated specifically to withstand thermal shocks, freeze/thaw cycles and chemical attack
• The product is supplied as a four-component system (including colour pack), pre-weighed for on-site mixing. Standard colours include brick red, grey and mid green

• Nitoflor Uragard is designed for use as heavy duty floor screed in environments where high resistance is required against impact, thermal shock, abrasion and chemicals
• The thermal stability and chemical resistance makes it suitable for use in food processing areas, drink and beverage production areas, cold stores, freezer rooms, commercial kitchens and restaurants
• It is particularly useful in areas when steam or hot water is required for cleaning

• Excellent mechanical properties
• High impact and abrasion resistance
• Resistant to thermal shock
• Resistant to steam and hot water cleaning
• Suitable for service range from -45°C to 115°C
• Resistant to freeze/thaw cycles
• Good resistance to a wide range of chemicals
• Antislip provides safe, textured slip-resistant surface for pedestrian and vehicular traffic

• Nitoflor Uragard is a polyurethane based floor screed designed for use at thickness between 5 mm and 12 mm
• The product is formulated specifically to withstand thermal shock, freeze/thaw cycles and chemical attack
• The product is supplied as a four-component system (including colour pack), pre-weighed for on-site mixing
• Standard colours include brick red, grey and mid green

• The values given below are typical figures achieved in laboratory tests

• Nitoprime Chemical is suitable for priming concrete surfaces prior to the application of any of the Nitoflor SL2000/4000, TS, TF range of resin based floor toppings, Nitocote range of protective coatings or Nitomortar range of epoxy repair mortars

• Can be applied even on damp surfaces
• Improves the adhesion of epoxy floor toppings and mortars with the substrate

• Nitoprime Chemical is a two component epoxy based primer with good penetrating properties for concrete surfaces

• Fosroc provides a countrywide technical advisory service supported by a team of specialists in the field.

• Thorough surface preparation is vital. For best results Fosroc recommends mechanical preparation techniques, (For example, mechanical scarifying, grit-blasting, sand blasting)
• For flooring and tanking works, care must be taken to ensure that the substrate does not suffer from rising dampness
• Should be at least 28 days old or have a moisturecontent less than 5% before proceeding with epoxy application
• Laitance and deposits on new concrete floors are best removed by light grit blasting, mechanical or grinding
• On smaller areas thorough etching using may be considered. After etching the floor, it should be thoroughly washed with clean water and then allowed to dry

• Nitoprime Chemical is the recommended primer for the range of cementitious flooring when applied to concrete and cementitious screeds
• The primer film forms and seals the substrate to prevent air release which could otherwise cause pinholes in the floor topping
• In addition it “wets” out the substrate, promotes adhesion and prevents desiccation of the Cemtop

• Excellent adhesion to concrete and cementitious screeds
• Excellent water resistance after film formation
• Economic, easy to use with no restrictive pot life

• Nitoprime Chemical is a water-based Styrene-acrylate copolymer emulsion, formulated to achieve specific performance characteristics
• It is supplied as a single component white liquid

• Fosroc offers a comprehensive range of high performance, high quality flooring, jointing and repair products for both new and existing floor surfaces
• In addition, Fosroc offers a technical support package to specifiers, end-users and contractors, as well as on-site technical assistance in locations all over the world

• For the majority of applications in both the industrial and commercial sectors, two coats of primer are recommended
• If the floor is extremely porous, a third coat may be necessary

• Specific gravity: 1.02
• Solids content: 44-46%
• Drying time at 20°C: 2-4 hours
• Maximum time between
• coats at 20°C: 24 hours
• Maximum overlay time
• at 20°C: 8 hours
• Minimum application
• temperature: 10°C

• It is suitable for priming concrete surfaces prior to the application of any of the Nitoflor SL2000/4000 and TF range of resin based floor toppings, Nitocote range of protective coatings or Nitomortar epoxy repair mortars

• Can be applied even on damp moist surfaces
• Improves the adhesion of epoxy floor toppings and epoxy mortars with the substrate

• Nitoprime Chemical is a two component epoxy based primer with good penetrating properties for concrete surfaces

• Fosroc provides a countrywide technical advisory service supported by a team of specialists in the field

• For best results it is recommended to use Nitoprime Chemical on concrete which is at least 7 days old, and prepared surface as per standard practice

• Shall be at least 7 days old before proceeding with primer application. Laitance and deposits on new concrete floors are best removed by light grit blasting, mechanical Scabbling or grinding
• On smaller areas thorough etching using Reebaklens may be considered. After etching the floor, it should be thoroughly washed with clean water

• To provide a hard wearing, easily cleaned, attractive tile grout where chemical resistance is required

• Resistant to mild chemicals and acids
• Solvent free can be used in confined areas
• Good resistance to abrasion and impact resistance
• Attractive appearance, easily cleaned
• Available in a range of attractive colours
• Resists bacterial growth
• Hygienic good to use in Laboratories, Hospitals and
• Health centers
• Good to use in wet area, fountains, swimming pool, kitchen, bathroom and Sauna
• Water miscible safe in use, no odour

• Nitotile EPW Grout is a 3 component water miscible epoxy resin tile joint filler based on new generation epoxy resin technology supplied in preweighed packs, ready for onsite mixing and use.

• Nitotile Chemical is a high quality adhesive for the permanent fixing of ceramic tiles
• It can also be used for fixing of insulating and acoustic boards based on expanded polystyrene etc.

• Wet areas kitchens and bathrooms
• Tile Cladding

• Tropical grade to suit Indian working conditions
• Good open wet time
• Good slip resistance
• High adhesion strength
• Water proof
• Good slip resistance
• Can be used in totally submerged conditions

• Nitotile Chemical conforms to BS 5980 Class AA Type 1 and suitability for contact with potable water as per BS 6920

• Nitotile Chemical cementitious powder is available in grey or white colour

• Fosroc offers a comprehensive technical support service to specifiers, end users and contractors
• It is also able to offer on-site technical assistance, an Auto CAD facility and dedicated specification assistance in locations all over the world

• All surfaces must be sound and thoroughly clean before Nitotile Chemical is applied
• All traces of grease or oil must be removed with a chemical 
• All loose particles of mortar, old wallpaper, paint etc. must be physically removed

• Kitchens
• Bathrooms
• Shower stalls
• Swimming pools

• Low cost service life Mould resistant, tropical grade
• Easy to apply Just add water for a thixotropic, non-slump grout
• Can be used in submerged conditions
• Available in a range of attractive colours

• Nitotile Grout is a blend of specially selected cements, fillers and synthetic organic polymers
• When added to water it readily blends to produce a smooth creamy paste which when set is water and mould resistant
• Nitotile Grout is used in conjunction with Nitotile tile adhesives

• Nitotile Chemical is a two part high quality polymer based adhesive for the permanent fixing of granite and marble tiles

• Prepacked product requiring only direct mixing at site
• High adhesive bond strength - Ideal for vertical and horizontal applications of granite, marble, etc.
• Excellent grab during open time
• Quick fixing - Reduces labour costs
• Can be used in the interior and exterior of buildings

• All surfaces must be sound and thoroughly cleaned before Nitotile Chemical is applied
• All traces of grease and oil must be removed. All loose particles of mortar, wallpaper, paint etc., must be physically removed
• The prepared surface must be with water, prior to application of Nitotile Chemical and must attain a saturated surface dry condition
• Nitotile Chemical can be applied directly on concrete, cement screeds, cement or lime mortars provided they are strong

• Take the liquid polymer in a suitable container and add the powder part under mixing
• Use a slow speed drill fitted with a paddle to get a uniform lump free consistency
• Nitotile Chemical can result in air entrainment which should be avoided
• Water should not be added to adjust the consistency of the paste

• Nitotile Chemical is applied on to the prepared substrate and spread with a serrated trowel to achieve a uniform thickness of 3 - 4mm
• Place the tiles firmly on to the adhesive bed ensuring total contact with a twisting motion
• Choose work areas so that the tiles can be fixed within the open time of the adhesive which is approx. 20 min. at 30 deg.C.
• Normally granite and marble tiles up-to a thickness of 20mm can be fixed in vertical position without problem

• Nitotile Chemical tile adhesive is a high quality adhesive used for the permanent fixing of tiles over smooth surfaces such as existing tiles, ceramic tiles or glass, subjected to damp and tropical conditions and for specialised applications such as tile on tile and tile-on-glass etc.

• Polymer modified pre - wetting of tiles not required and hence less prone to cracking of mortar
• Single component ease of application
• Non toxic User friendly application
• Excellent adhesion on smooth surfaces - Develops high adhesive bond strength
• Non shrink excellent bond with the substrate
• Excellent work and open wet time of 2 hrs at 300⁰C - allows the mason to fix tiles at ease even under hot conditions
• Self cure does not require external curing
• Forms a dense and impermeable mortar bed - waterproof

• Nitotile Chemical meets / exceeds the requirements for tensile adhesive strength of BS 5980-1980, Class AA, A & B

• Nitotile Chemical is a single component, polymer modified cement based grey coloured powder

• The company provides a technical advisory service supported by a team of specialists in the field.

• For the removal of mortar and plaster runs, droppings and stains from brickwork and concrete surfaces. Also for removal of hardened concrete from tools, machinery and equipment, or rust and mill scale from steel work
• Suitable for etching of concrete floors and surfaces prior to application surface coatings

• Safe with metals (except zinc and Galvanised steel), wood, glass, plastic and rubber. No corrosive action. Penetrates oil and grease

• Reebaklens is a combination of acid based material, corrosion inhibitors and dispersing agents and is supplied as a clear blue solution

• Fosroc provides a technical advisory service to specifiers, end-users and contractors as well as on-site technical assistance in locations all over the country

• Specific gravity: Typically 1.08 at 250⁰C

• A small trial area should be cleaned first to determine the most suitable Reebaklens cleaning agent dilution the brickwork, then using a sponge, rub the affected areas with a solution of Reebaklens cleaning agent and water
• Strength of the solution required will vary but should be between 1:1 and 1:4 (by volume of Reebakle cleaning agent to water). When the action has finished, wash down thoroughly with clean water

• Reebaklens RR is used as a rust remover from steel bars prior to encasing in concrete / microconcrete. It can also be used on ohter steel surfaces prior to coating with epoxy systems

• Safe with metals (except zinc and galvanised steel), wood, glass, plastic and rubber. No corrosive action. Penetrates oil and grease

• Reebaklens RR cleaning agent is a combination of acid based material, corrosion inhibitors and dispersing agents and is supplied as a clear green solution

• Fosroc provides a technical advisory service to specifiers, end-users and contractors as well as on-site technical assistance in locations all over the country

• Specific gravity: 1.16 - 1.22 @ 250C

• Apply Reebaklens RR with brush for complete wetting of rusted metal surface and allowed to react it for 16-24 hours
• After 24 hours, a white layer will appear which will protect further corrosion of metal / steel for about 5-7 days. Before applying protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth

• The floors, then using a stiff bristle broom, brush the affected areas with a solution of Reebaklens RR cleaning agent and water
• Strength of the solution required will vary but should be between 1 : 1 and 1 : 4 (Reebaklens RR cleaning agent to water)

• To provide quick, clean and easy stripping of moulds, and formwork and ensure high quality fair-faced and stain-free concrete

• Ensures easy release, good fair-faced concrete
• Can be used on all types of formwork
• Minimises surface blemishes and staining
• Minimises cleaning of shutters before re-use
• Reduces opportunity of damage to formwork, extending usable life

• Reebol is specially formulated blend of mineral oils and chemicals having release properties which are superior to those of a conventional mould oil
• The chemicals react with the alkali in the concrete to form a thin water repellent skin on the surface of the mould, thereby enabling easy striping from concrete and acting as a protection to steel and wooden form work
• Reebol is supplied as a pale straw coloured liquid ready for direct application and use

• Fosroc provides a technical advisory service supported by a team of specialists in the field

• Specific gravity: 0.83 - 0.85 at 27⁰C
• Service temperature: Suitable for use with steam cured concrete
• Formwork surfaces: Equally effective on wood or metal moulds and shutters. Particularly effective on GRP and other resinous coatings including Reebol coated wooden surfaces
• Non-staining: Does not stain concrete and can also be used safely with white cement
• Concrete surface quality: In addition to preventing adhesion of the cement paste to the mould or shutter face, Reebol allows air, which would otherwise be trapped, to escape from the face when the concrete is being poured and vibrated

• For easy and stain free release of concrete moulds and form work of all types. Particularly where wooden form work is used and de-moulding or stripping times exceed 24 hours

• Non-staining: No cleaning of unsightly oil stains if plastering is not required
• High quality: Produces really fair faced finish concrete
• Versatile: Can be used on all types of moulds
• Minimizes cleaning: Makes cleaning of form faces between pours very easy
• Concentrate form: Reduces storage and transport costs
• Water based: Only requires water for dilution

• Reebol Emulsion is supplied as a pale amber liquid which turns white when diluted with water to produce a chemical release agent, combining the outstanding release properties of such materials with the economy of a conventional oil
• It reacts with the alkali in the concrete to form a thin water repellent skin on the surface of the mould which enables easy stripping from the hardened concrete

• Fosroc offers a comprehensive range of high performance, high quality concrete repair and construction products
• Fosroc offers technical support service to specifiers, end-users and contractors, as well as on-site technical assistance in locations all over the country

• For easy and stain free release of concrete moulds and form work of all types. Particularly where wooden form work is used and De-moulding or stripping times exceed 24 hours

• Non-staining: No cleaning of unsightly oil stains if plastering is not required
• High quality: Produces really fair faced finish concrete
• Versatile: Can be used on all types of moulds
• Minimizes cleaning: Makes cleaning of form faces between pours very easy
• Concentrate form: Reduces storage and transport costs
• Water based: Only requires water for dilution
• Aids corrosion inhibition

• Reebol Emulsion Extra is supplied as a pale amber liquid which turns white when diluted with water to produce a chemical release agent, combining the outstanding release properties of such materials with the economy of a conventional oil
• It reacts with the alkali in the concrete to form a thin water repellent skin on the surface of the mould which enables easy stripping from the hardened concrete

• Fosroc offers a comprehensive range of high performance, high quality concrete repair and construction products
• Fosroc offers technical support service to specifiers, end-users and contractors, as well as on-site technical assistance in locations all over the country

• To provide quick, clean and easy stripping of moulds, and form work and ensure high quality fair-faced concrete

• Ensures easy release, reducing damage and improving efficiency of production
• Minimizes surface blemishes and staining, promoting high quality fair-faced concrete
• Reduces opportunity of damage to form work, extending usable life
• Minimizes cleaning of form work before reuse
• Suitable for use with virtually all types of form work
• Inhibits corrosion of steel form work

• Reebol Std is specially formulated blend of mineral oils and chemicals having release properties which are superior to those of a conventional mould oil
• The chemicals react with the alkali in the concrete to form a thin water repellent skin on the surface of the mould, thereby enabling easy striping from concrete and acting as a protection to steel and wooden form work.
• Reebol Std is supplied as a dark greenish-black liquid ready for direct application and use.

• Fosroc provides a technical advisory service supported by a team of specialists in the field

• Specific gravity: 0.89 at 270⁰C
• Service temperature: Suitable for use with steam cured concrete
• Form work surfaces: Equally effective on wood or metal moulds and shutters. Particularly effective on GRP and other resinous coatings including Reebol Std coated wooden surfaces
• Staining: No significant staining observed on normal concrete. However not recommended for use with white cement

• Car park decks
• Car park ramps
• Turning areas
• Entrance/exit areas
• Thoroughfares

• Flexible and bridges dynamic cracks
• Suitable for all zones in a car park
• Seamless and watertight
• Rapid application, reliable and safe
• UV resistant

• Trafficguard Chemical is a multi-layer deck protection system comprising a primer and flexible Top Coat
• All components are applied in the liquid phase and react chemically to form a tough, flexible, waterproof protective surface
• Trafficguard Chemical is available in a range of standard colours. Contact your local Fosroc office for full details.

• Brushcrete Chemical polymer in conjunction with cement provides a seamless waterproof coating to concrete and masonry surfaces. It can be used as a waterproof or protective coating

• Can be applied in uniform thickness to horizontal and vertical surfaces
• Develops excellent bond to most building materials
• Reduces or prevents salt penetration into concrete
• Is not affected by ultraviolet light or by chemicals ranging from mild acids to strong alkalies
• Is highly durable in continuous wet condition
• Is non-flammable and does not give off toxic gases, when exposed to fire
• Non toxic

• Brushcrete Chemical is a single component acrylic polymer which in conjunction with cement forms a composite polymer modified cemntitious waterproofing system

• The company provides a technical advisory service supported by a team of specialists in the field

• Pot life: 20-30 min. at 300⁰C
• Mixed Density of: 2.1-2.2 g/cc.
• brushcrete topping:  White liquid
• Colour:  > 100⁰C < 350⁰C
• Application temperature:  > 1N/mm²

• Waterproofing of toilets, terraces, roofs, etc.
• General concrete repairs
• Protection of concrete against salt attack etc.

• Brushbond Chemical provides a seamless, waterproof coating suitable for use in water tanks, reservoirs, swimming pools, roofs and to ensure water tightness
• Brushbond Chemical effectively protects against concrete decay providing a long lasting barrier to waterborne corrosive salts and atmospheric gases
• Brushbond Chemical is designed to re-face and even out variations in concrete and masonry surfaces
• Brushbond Chemical effectively seals concrete masonry walls and bridges the shrinkage cracks which are static
• Brushbond Chemical provides a tough and durable coating which cannot be easily damaged or worn away

• Minimum surface preparation needed low labour costs
• Applied directly to the damp concrete and masonry
• Excellent adhesion bonds to porous and nonporous surfaces
• Non-toxic-ideal for potable water tanks
• Waterproof excellent for damp-proofing basements
• Breathable allows transmission of water vapour from interior of building
• Excellent for concrete roof, leaking brick and masonry walls
• Good resistance to Carbon dioxide and Chloride ion diffusion

• Brushbond Chemical is a two component acrylic polymer modified elastomeric waterproofing membrane which consists of Brushbond Chemical powder and Nitobond BB acrylic emulsion
• It requires only the addition of water on site and when mixed in the proper proportions, an easily brushable coating is produced
• Brushbond Chemical can simply be applied by a stiff brush, or trowel to obtain the desired thickness
• Brushbond Chemical powder consists of specially selected cements, graded hard-wearing aggregates and additives supplied in powder and Nitobond BB liquid component of blended acrylic co-polymers
• The polymer provides Brushbond Chemical with exceptional adhesion, toughness and durability

• The company provides a technical advisory service supported by a team of specialists in the field

• Brushbond Cool Coatt is designed for use as a thermal insulation coating on roof slabs and walls of buildings. It can also be used on the interior walls and the roof of freezer rooms and cold storage facilities

Features:

• Minimum surface preparation needed
• Single component - Brush or roller applied directly on the substrate
• Light weight yet effective
• Excellent adhesion to most building substrates
• Low thermal conductivity reduces energy consumption
• Durable - High UV resistance

• Concrete
• Asbestos sheet
• weatherproof and roofing materials

• External and internal walls
• Cold storage facilities
• Roof slabs

• Brushbond Cool Coat  is a water-based white coloured emulsion comprising of polymers and specially designed hollow “microspheres”, less than 100 microns in diameter with non conductive properties
• These microspheres collectively acts as thermal insulation blanket covering the structure effectively reflecting solar radiation back into the atmosphere. This results in impressive temperature reduction behind the substrate

• The company provides a technical advisory service supported by a team of specialists in the field

• Brushbond Chemical is an high performance elastomeric cementitious coating used for waterproofing and to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen & water
• Brushbond RFX is suitable for all types of structures including those in coastal environments
• The product can be used on concrete, brick and block work substrates and is equally suitable for new and existing structures
• The product is designed to reface and even out variations in concrete and masonry surfaces and bridge shrinkage cracks
• It provides a seamless, flexible waterproof coating suitable for water tanks, reservoirs, drainage culverts basements and roofs
• The product provides a tough durable water resistant coating which can withstand light pedestrian traffic and also has excellent weather resistance for exterior applications

• Excellent barrier to carbon dioxide, chloride and sulphate ions
• Allows water vapour to escape from the structure
• Waterproof-suitable for water retaining structures
• High resistance to the effect of long-term weathering
• durable in all climate conditions including UV attack
• Non toxic - ideal for potable water tanks
• Flexible, with thermal expansion similar to concrete
• Excellent bond to concrete and masonry
• Good crack accommodation capacity
• Minimum surface preparation needed and low labour costs

• Tested to ASTM D4060, ASTM D4541, ASTM D638, ASTM C836

• Brushbond Chemical is a two component acrylic polymer modified cementitious coating which consists of Brushbond Chemical powder and Nitobond BBX acrylic emulsion
• It requires only the addition of clean water at site to produce an easily coating
• Brushbond Chemical can simply be applied by stiff brush, roller or trowel to obtain the desired thickness

• Fosroc offers technical support service to specifiers, end- users and contractors, as well as on-site technical assistance in locations all over the country

• Sewage treatment and water treatment plants, tanks, foundations, tunnels and manholes
• Terrace garden, balconies, sunshades etc.
• Roof and Sunken slabs
• Industrial and office buildings
• Reservoirs, water holding structures etc.

• Meets the requirements as per ANSI/NSF Std 61 for suitability to potable water
• Penetrates concrete, seals capillary tracts
• Contains no chloride
• Easy to apply
• Resists chemical attack of sewage and industrial wastes
• Suitable for external and internal applications

• Brushbond Chemical crystalline capillary waterproofing system contains proprietary blend of port-land cement, quartz aggregate and special chemicals
• In the presence of moisture, the active chemicals in Brushbond Chemical crystalline waterproofing system penetrates concrete and react chemically with free lime to produce insoluble crystals
• This crystalline growth reduces porosity by blocking capillaries and filling hairline non structural cracks ( up-to 0.25mm wide) caused by shrinkage or expansion
• Unlike metallic and membrane types of waterproofing which only form a surface barrier, Brushbond Chemical crystalline waterproofing system, in the presence of water, continues producing crystals and lasting imperiousness to water

• The company provides a technical advisory service supported by a team of specialists in the field

• Brushbond TI Flexicoat is designed for use as a thermal insulation coating on roof slabs and walls of buildings
• It can also be used on the interior walls and the roof of freezer rooms and cold storage facilities

• Concrete or metal roofs
• Asbestos sheet and other metal surfaces
• External and internal walls
• Cold storage facilities
• Steam pipes and fittings
• Wood, tiles, PU foams and asphalt shingles

• Minimum surface preparation needed
• Single component Brush or roller applied directly on the substrate
• Light weight yet effective
• Excellent adhesion to most building substrates
• Excellent flexibility at both high and low temperatures
• Non conductive property saves air conditioning energy cost
• Has resistance to water penetration
• Flexible high elongation characteristics
• Good resistance to atmospheric pollution
• Durable High UV resistance
• Breathable allows water vapour to escape

• Brushbond TI Flexicoat is a water-based white coloured emulsion comprising of acrylic polymers and specially designed hollow “micro spheres”, less than 100 microns in diameter with non conductive properties
• These micro spheres collectively acts as thermal insulation blanket covering the structure effectively reflecting solar radiation back into the atmosphere
• This results in impressive temperature reduction behind the substrate by a min. of 100⁰C
• This system also has certain waterproofing properties and is able to bridge hairline cracks caused by thermal movements

• Brushcrete Chemical polymer in conjunction with cement provides a seamless waterproof coating to concrete and masonry surfaces. It can be used as a waterproof or protective coating

• Can be applied in uniform thickness to horizontal and vertical surfaces
• Develops excellent bond to most building materials
• Reduces or prevents salt penetration into concrete
• Is not affected by ultraviolet light or by chemicals ranging from mild acids to strong alkalies
• Is highly durable in continuous wet condition
• Is non-flammable and does not give off toxic gases, when exposed to fire
• Non toxic

• Brushcrete Chemical is a single component acrylic polymer which in conjunction with cement forms a composite polymer modified cemntitious waterproofing system

• The company provides a technical advisory service supported by a team of specialists in the field

• Pot life: 20-30 min. at 300⁰C
• Mixed Density of: 2.1-2.2 g/cc.
• Brushcrete Chemical topping Colour: White liquid
• Application temperature: > 100⁰C <350⁰C
• Bond strength with concrete: > 1N/mm²

• Waterproofing of toilets, terraces, roofs, etc.
• General concrete repairs
• Protection of concrete against salt attack etc.

• For sealing and maintenance of joints in concrete roads, concrete runways and hard standings
• The excellent fuel resistance of Colpor Chemical makes it particularly suitable for sealing areas where fuel and oil spillage might occur
• Aircraft fueling areas
• Oil terminals
• Garage forecourts
• Parking and cargo areas
• Docks and harbors
• Warehouses

• Cold applied no heating equipment required
• Fuel, oil and hydraulic fluid resistant
• Self-leveling
• Tough rubbery seal
• High performance less maintenance

• Colpor 200 complies with U.S. Federal Specification SS- S-200E:1984 and British Standard 5212:1990 - types N, F and FB

• Fosroc Colpor Chemical cold applied, two part polyurethane sealant is designed for joints in concrete paved areas
• The capability of accommodating cyclic movements is retained by Colpor Chemical throughout extremes of temperature conditions
• Colpor Chemical is resistant to fuel, oil and hydraulic fluid spillage, will not harden in cold weather nor become excessively soft or pick up in hot conditions
• Colpor Chemical has high durability and long service life which significantly reduces maintenance costs

• Wall / ceiling angles, cornices
• Door and window frame surrounds
• Fitted furniture
• Staircases
• Replacement window installations

• Easy to apply and finish
• Excellent adhesion to most building materials
• Fast setting
• Non-staining
• Flexible seal
• Can be over painted or papered

• Decofill Chemical acrylic sealant is a white acrylic based gap filler in paste form for application from a cartridge
• It is very quick and easy to apply and can be finished or smoothed off with a spatula or a damp sponge
• It sets quickly on application and will accept paint or wallpaper finishes
• Typical uses for Decofill Chemical acrylic sealant are gaps between, window and door frames, fitted furniture units and ceiling cornices and adjacent plaster work
• Where replacement windows are installed Decofill Chemical acrylic sealant can be used to make good between new frames and interior plaster work

• Decofill Chemical acrylic sealant is primarily applied as a triangular fillet into angles
• Gaps up to 25mm wide can be filled using Decofill Chemical acrylic sealant without slumping although the larger volume of compound will take longer to set and will give some shrinkage on setting, forming a concave surface

• To protect atmospherically exposed reinforced con structures from attack by acid gases, chloride ions, sulphates, oxygen and water
• The product is also suitable to protect other cementitious substrate and masonry. Dekguard S is suitable for use on all types of structures, especially those in aggressive marine and coastal environments
• Dekguard S is a component of Fosroc's Renderoc system of concrete reinstatement

• Excellent barrier to carbon dioxide, chloride ions, sulphates, oxygen and water
• Allows water vapour to escape from the structure
• Highly UV resistant aliphatic acrylate gives exceptional resistance to the effects of long term weathering
• Highly durable in all climatic conditions
• Selected range of decorative colours
• Ease of application single pack no mixing of separate components

• Dekguard Chemical has been approved by the British Board of Agreement under Certificate No. 92/2824

• Dekguard Chemical system comprises of a single component, penetrating silane/silaxone primer and a single component pigmented coating, both ready for immediate site use
• The primer, Dekguard Chemical primer is supplied as a clear liquid and is based on a silane/silaxone blend dissolved in a penetrating organic carrier
• The primer is reactive and capable of producing a chemically bound hydrophobic barrier, thus inhibiting the passage of water and waterborne contaminants
• Dekguard Chemical is aliphatic acrylate, solvent based protective coating, providing outstanding resistance to aggressive agents, UV light and rain. It is available in a selected range of colours

• Dekguard Standard system is suitable for use on all types of structures which are not directly exposed to sea, to protect structures from attack by acid gases, chloride ions, sulphates, oxygen and water. The product is also suitable to protect other cementitious substrate and masonry

• Protects exposed reinforced concrete structures from atmospheric gases - excellent barrier to carbon dioxide, chloride ions, sulphates, oxygen and water
• Breathable allows water vapour to escape from the structure. But does not allow water vapour to penetrate the structure
• UV resistant aliphatic acrylate gives resistance to long term weathering
• Single pack Ease of application, can be applied with brush or airless spray

• Dekguard Standard system comprises of a single component, penetrating silane/siloxane primer and a single component aliphatic acrylate, solvent based top coat, providing resistance to aggressive agents, UV rays and rain
• Dekguard Standard system is supplied in ready to use packs and is available in a range of colours

• The company provides a technical advisory service supported by a team of specialists in the field.

• Expancell Chemical is a closed cell polyethylene foam supplied in circular cord lengths for use as a back up material for joint sealing applications
• Expancell Chemical is available in a variety of sizes ranging from 6mm to 50mm in diameter suitable for the most commonly encountered joint dimensions

• Economical
• Easy to install
• Readily compressible
• Rot proof and non-absorbent
• Provides bond breaker and minimum strain shape for joint sealants
• Provides a firm backing for sealant tooling

• Expancell Chemical polyethylene foam back-up cords have the ability to perform several functions
• They enable the correct width to depth ratio of the sealing slot to be maintained and provide a firm backing for the sealant to be tooled
• This will precipitate wetting of the sides of the joint during the sealant application thus facilitating good adhesion
• The use of Expancell Chemicall will also act as a bond breaker at the base of the joint thus preventing three sided adhesion and the accompanying additional stress during joint movement. Non-absorbent and rot proof, the functional performance of Expancell Chemical is not impaired by climatic extremes.

• For the fast and permanent reinstatement of concrete, particularly where high strength, abrasion, impact and chemical resistance are required
• The product is designed for horizontal applications
• It is ideally suited for reinstatement of defective concrete surface in bridges, dams, foundations, slabs, joints in highways, concrete runways and for use as a bedding material

• Solvent free
• Dimensionally stable hardening
• High compressive and abrasion strengths
• Curing unaffected by humidity
• Suitable for both damp and dry surfaces
• Rapid hardening at low temperatures
• Impact resistant

• Expocrete EC is a solvent free, epoxy based repair concrete, which is supplied as three component system and the coarse aggregate in the ratio recommended to be added at site

• The company provides a technical advisory service supported by a team of specialists in the field.

• For the fast and permanent reinstatement of concrete, particularly where high strength, abrasion, impact and chemical resistance are required
• The product is designed for horizontal applications
• It is ideally suited for reinstatement of defective concrete surface in bridges, dams, foundations, slabs, joints in highways, concrete runways and for use as a bedding material

• Solvent free
• Dimensionally stable hardening
• High compressive and abrasion strengths
• Curing unaffected by humidity
• Suitable for both damp and dry surfaces
• Rapid hardening at low temperatures
• Impact resistant

• EC is a solvent free, epoxy based repair concrete, which is supplied as three component system and the coarse aggregate in the ratio recommended to be added at site

• The company provides a technical advisory service supported by a team of specialists in the field

• Hydrocell Chemical is a cross linked, non absorbent, semi-rigid, cellular polyethylene joint filler used for forming expansion joints in concrete, brickwork and block work
• The product provides excellent support to sealants subject to hydrostatic pressure and is particularly recommended for water retaining or water excluding structures
• Hydrocell Chemical is a high-performance replacement for traditional sponge rubber (ASTM D1752, type 1) and cork (ASTM D1752, type 2) joint fillers

• Cross linked to resist lateral and hydrostatic pressure
• High density support of sealant to prevent adhesion failure
• Non absorbent closed cell structure
• High compression recovery
• Non-extruding
• Low load transfer to joint edges
• Non tainting
• Chemically resistant
• Natural bond breaker
• Rot proof

• Water Authorities Association, Civil Engineering Spec
• Water Industry, 4th Edition Clause 2.124
• UK WFBS listed product suitable for use in contact with potable water
• DTp Specification for Highway Works, Dec 1991, Series 1000 clause 1015
• Exceeds the performance requirements of ASTM D1752-84 and AASHTO M153-92 for recovery and extrusion

• The joint filler shall be cross linked, non absorbent, semi- rigid, cellular polyethylene with a nominal density of 60 kg/m³
• It shall have a recovery of 98% after 50% compression and a compressive strength of 0.15 N/mm² when tested in accordance with ASTM D3575
• It shall have a water absorption of less than 0.05% by volume when tested in accordance with ASTM D3575 and be resistant to weathering and chemical attack
• The joint filler shall have Water Scheme approval for use in contact with potable water

• Provides an effective and economical method of waterproofing to concrete and masonry surfaces, by mixing with cement and application by brush

• Non toxic, non-flammable and user friendly
• Provides a tough, impermeable waterproof membrane
• Can be applied by brush, on horizontal and vertical surfaces
• Excellent adhesion to concrete and masonry surfaces
• Protects concrete and mortar from natural elements such as wind, rain, sunlight
• Breathable allows inside water vapour to escape

• Hydroproof Chemical is formulated to be mixed with cement on site or simply brush applied over concrete or masonry surfaces to provide an effective waterproof membrane

• Fosroc provides a technical advisory service supported by a team of specialists in the field

• Roofs, terraces and balconies as a sandwich layer
• Pools and fountains
• Reservoirs and channels
• End walls subjected to rain.

• Nitocote Chemical is an Epoxy Novolac lining designed to provide protection to concrete and steel structures in aggressive chemical conditions
• The material is particularly suitable in waste water treatment plants, desalination plants, food processing plants, pump and paper mills, electric power plants, chemical manufacturing plants, fertiliser and insecticide plants and petroleum refineries.
• Nitocote Chemical may be used with or without Fosroc Anti-slip grains as a heavy-duty floor coating in applications such as chemical processing and drum storage areas, loading docks and ramps. It may also be used in conjunction with glass fibre cloth to increase the thickness of the system or to reinforce structures subjected to aggressive chemicals.

• 100% solids, no solvents
• Excellent chemical resistance in pH ranging from 1-14 at 25°C
• Excellent adhesion to properly prepared concrete, mild steel, and other substrates
• Excellent abrasion resistance

• Nitocote Chemical is a solvent free, highly crosslinked, high build epoxy-novolac-based coating
• Nitocote Chemical is a two- part material and can be applied by brush, roller or airless spray. Nitocote Chemical is grey in colour
• It is formulated to be applied in one or two coats to achieve a minimum total-dry- film thickness of 500 microns. Higher thickness can be specified

• The chemical and abrasion resistant coating shall be Nitocote Chemical, a high build, two-pack epoxy-novolac system specially designed to provide a tough and impermeable high chemical resistant film

• Nitocote Chemical is used as a hygienic and chemical resistant coating for steel tanks, concrete walls, concrete and metal columns, sluices and ducts

• Excellent adhesion compatible with all substrates. Can be applied directly on to mild steel and concrete
• Hygienic & Aesthetic forms a smooth, glossy and easy to clean surface on curing
• Chemical resistant proven against a wide range of industrial chemicals

• Nitocote Chemical coating is based on sol-vented epoxy resins specially formulated to provide a durable coating suitable for application to both vertical and horizontal surfaces
• It cures to form a smooth hygienic film with good resistance to a wide range of mineral and organic acids, fats, alkalis and oils

• Fosroc provides a technical advisory service supported by a team of specialists in the field

• Nitocote Chemical is used for lining and waterproofing potable water retaining structures and surfaces subject to contact with foodstuffs
• The cured film is resistant to corrosion, chemical attack and abrasion and is suitable for application to reservoirs, tanks, silos, water treatment works, breweries, dairies and meat and food processing plants
• The cured film is non-toxic and meets the requirements of IS : 9833 - 1981

• Food grade & Hygienic CFTRI approved for suitability to potable water and food stuff storage
• Compatible with all substrates Can be applied directly on to mild steel and concrete
• Aesthetic Forms a smooth, glossy and to easy clean surface on curing
• Abrasion resistant exceptional resistance to abrasion and to a wide range of chemicals
• Corrosion resistant Does not contain any metallic particles
• Chemical resistant proven against a wide range of industrial chemicals
• Solvent free & Non toxic No odour during application and can be used in confined areas.

• Nitocote Chemical is a two pack, solvent free, epoxy resin material. It is supplied in per-measured quantities ready for site mixing and use
• The material cures to provide a smooth, hygienic and tough finish which is suitable for contact with potable water and foodstuffs. It is available in blue and white colours

• Fosroc provides a technical advisory service supported by a team of specialists in the field.

• Nitocote Chemical is designed to be applied in two coats to achieve a minimum total dry film thickness of 200 microns
• To achieve the correct protective properties, Nitocote Chemical must be applied on to the substrate at the coverage rates recommended

• A hygienic and chemical resistant coating for brick and concrete walls, concrete and metal tanks, sluices and ducts

• Excellent adhesion compatible with all substrates. Can be applied directly on to mild steel and concrete
• Hygienic & Aesthetic forms a smooth, glossy and easy to clean surface on curing
• Abrasion resistant exceptional resistance to abrasion and to a wide range of chemicals
• Chemical resistant proven against a wide range of industrial chemicals

• Nitocote Chemical high build surface protective coating is based on solvent free epoxy resins specially formulated to provide a thixotropic coating suitable for application to vertical surfaces
• It cures to form a smooth hygienic film with good resistance to a wide range of mineral and organic acids, alkalis, fats and oils

• The company provides a technical advisory service supported by a team of specialists in the field

• A Hygienic and chemical resistant coating for brick and concrete walls, concrete and metal tanks, sluices and ducts

• Excellent adhesion compatible with all substrates, Can be applied directly on to mild steel and concrete
• Hygienic & Aesthetic Forms a smooth, glossy and easy to clean surface on curing
• Abrasion resistant exceptional resistance to abrasion and to a wide range of chemicals
• Chemical resistant proven against a wide range of industrial chemicals

• Nitocote Chemical high build surface protective coating is based on solvent free epoxy resins specially formulated to provide a thixotropic coating suitable for application to vertical surfaces
• It cures to form a smooth hygienic film with good resistance to a wide range of mineral and organic acids, alkalis, fats and oils

• The company provides a technical advisory service supported by a team of specialists in the field

• Provides protection to concrete and metal structures against corrosion from aggressive environments
• Suitable for tanks above ground or in totally submerged conditions such as pipelines. Particularly useful in sewage works, effluent plants and dock and installations

• Excellent resistance to all types of water
• Easily applied by brush or spray
• Provides long term corrosion protection
• No priming necessary in most cases
• Chemical and abrasion resistant
• Economic and versatile product

• Nitocote Chemical coating is based on sol-vented coal tar epoxy resins specially formulated to provide a durable coating suitable for application to both vertical and horizontal surfaces
• Supplied as a two component system comprising a special blend of pitch epoxy resins and amine hardeners

• Fosroc provides technical advisory service on request, supported by a team of specialists in the field.

• Nitocote Chemical provides protection to concrete and metal structures against corrosion from aggressive environments. Suitable for tanks above ground or in totally submerged conditions such as pipe linings
• Particularly useful in sewage works, effluent plants and dock and installations

• High film build in single application
• Easily applied by brush or spray
• Provides long term corrosion protection
• No priming necessary in most cases
• Chemical and abrasion resistant
• Economic and versatile product

• Thixotropic pitch extended epoxy amine adduct formulation containing reinforcing inert fillers and special blend of solvents
• The product is supplied as a two-component system comprising a special blend epoxy resins and a separate low viscosity amine hardener

• Fosroc offers technical support service to specifiers, end- users and contractors, as well as on-site technical assistance in locations all over the country

• Nitocote Chemical is designed to be applied in two coats to achieve a minimum total dry film thickness of 350 microns. To achieve the correct protective properties
• Nitocote Chemical must be applied at the coverage rates given overleaf

• Provides a highly effective waterproofing cum protective coating, with chemical and abrasion resistance to prevent corrosion in reinforced concrete members and exhibits cost and labour saving supplementary benefits

• Labour saving, single component material which is also water based, and therefore non-toxic
• UV stable will not fade or deteriorate in strong sunlight
• Environmentally friendly, solvent, pitch and asbestos free and can be used in confined spaces
• Excellent service life  resistant to chloride and sulphate ions plus a wide range of chemicals
• Durable finish offers good abrasion resistanc

• Nitocote Chemical also complies with the concrete curing requirements of ASTM C309, when applied at the rate of 5m² per litre

• Nitocote Chemical is a single component, high performance, grey colour viscous liquid coating based on hydrophobic polyester resin
• It is totally free from hazardous materials/ carcinogens such as coal tar pitch, hydrocarbon based solvents, aromatic amines etc.

• Where shown on the contract documents, below ground surfaces shall be protected with Nitocote PE135, a hydrophobic polyester emulsion coating at a rate of 400 microns wet film thickness

• Nitocote Putty is a white ready-to-use putty for fairing and smoothing plastered and fair face concrete surfaces
• In addition to that, it can be used for filling hairline cracks to give a smooth and high quality surface ready for application for all kinds of paints

• Smooth surface
• Good Coverage for all types of voids
• Rapid drying
• Easy to apply
• Excellent bonding to moist building surface
• Ability to apply at relatively high thickness

• Ready to use white paste on most building surfaces. It gives high quality, even surface for painting. Nitocote Putty is specifically manufactured for the painter

• Fosroc offers a comprehensive range of high performance, high quality repair, maintenance and construction products
• Fosroc offers a technical support package to specifiers, end-users and contractors, as well as on-site technical assistance in locations all over the world

• Nitocote Chemical water repellent, is used to provide water repellent surface with improved self cleaning properties on exterior building - brick work, concrete, cement rendering, natural or cast stone
• Helps in reducing efflorescence due to soluble salts in brickwork

• Ready to use : Brush or spray applied direct from container
• Versatile: Equally effective on old or new surfaces
• Self-cleaning : Unaffected by salt-laden atmosphere, reduces unsightly staining
• Protects brickwork: Risk of efflorescence is reduced
• Protects concrete: Reduces causes of cracking and crazing in in-situ or precast concrete
• Colorless: Preserves natural colour and texture of created material. Allows surface to breathe

• Nitocote Chemical water repellent complies with BS 6744-92
• Class A and Class B as silicone based water repellent
• For application on brickwork, concrete, cement rendering, nature or cast stone of predominantly silicaceous nature, it complies with BS6744-92 Class A
• For application on sand stone, lime stone, calcium silicate, brickwork, natural or cast stone of predominantly calcareous nature, complies with BS6744-92 Class B

• Nitocote Chemical water repellent is supplied as a colorless, ready to use, silicone resin solution which can be sprayed or brush applied onto the surface

• Fosroc offers a comprehensive range of high performance, high quality concrete repair and construction products
• Fosroc offers technical support service to specifiers, end users and contractors, as well as on site technical assistance in locations all over the country.

• Nitocote Chemical provides an easily cleaned chemical and UV resistant protective coating, also suitable for external waterproofing

• Durable Low maintenance costs
• Non yellowing Will not yellow on exposure to UV rays
• Chemical resistant excellent resistance to most industrial chemicals
• Hygienic seamless surface, easily cleaned

• Nitocote Chemical meets the requirements of UL 94 for resistance to spread of flame

• Nitocote Chemical is a two component, pigmented, aliphatic polyurethane coating possessing good resistance to long term exposure of UV rays and chemical attack

• Fosroc offers technical support & service to specifiers and contractors as well as on-site assistance

• Nitofill Chemical is used for injecting into cracks, honeycombs and cavities in concrete structures. It can also be used for grouting base plates with very narrow gaps ( <10mm)

• Low viscosity can be injected into fine cavities and narrow gaps
• High mechanical strength performs even under heavy loads and stresses
• Excellent adhesive strength Good bonding with substrate
• Two part system easy to mix and handle
• Non shrink complete filling of voids and cracks
• Chemical resistant can be used in aggressive environments

• Nitofill Chemical is a two part system comprising of liquid base and hardener. It is designed for injecting into narrow gaps, cracks and voids ranging from 0.25mm to 9mm

• Fosroc offers a comprehensive range of high performance, high quality concrete repair and construction products
• Fosroc offers technical support service to specifiers, end- users and contractors, as well as on-site technical assistance in locations all over the country.

• Nitoprime Zincrich 90 is the recommended anti-corrosion primer for exposed steel reinforcement for use with Fosroc concrete repair mortars
• The product actively resists corrosion within the confines of the repair location and avoids the generation of incipient anodes in immediately adjacent locations
• It is fully compatible with all Renderoc mortars and fluid micro- concretes

• Active 'Zinc-rich' system combats corrosion by electrochemical means
• Formulated for use with Renderoc repair products
• Single component product - easy to use with no restrictive pot life
• Time saving fast trying time
• Economical single component ensures almost no waste

• The product has also been approved by the British Board of Agreement, Certificate No. 98/3461 as part of the Renderoc system of concrete repair

• Nitoprime Zincrich is supplied as a single component grey coloured liquid based on metallic zinc and epoxy resins.

• Fosroc offers a comprehensive range of high performance, high quality concrete repair and construction products
• In addition, Fosroc offers a technical support service to specifiers, end-users and contractors, as well as on-site technical assistance in locations all over the country

• One or two coats of Nitoprime Zincrich are generally required, dependent largely on the nature and profile of the substrate
• Nitoprime Zincrich is recoatable generally between 30 minutes and one hour after the application of first coat. application of top coating /concrete repair materials may also proceed at this time
• At elevated temperatures, the recoatableand overlay times will be reduced
• The minimum application temperature for Nitoprime Zincrich is 50 . Consult the local Fosroc office for further information

• For sealing internal floor joints subject to heavy industrial use in factories, food processing areas, warehouses and maintenance facilities
• Particularly suitable for sawn joints in long strip flooring and other large internal areas

• Load bearing for support of arrises under heavy wheel load
• Good resistance to chemicals and hydrocarbon fuels
• Excellent adhesion without primer to dry clean concrete
• Pouring grade ensures ease of placing
• Suitable for use in wide joints
• Self levelling to produce uniform and neat joints

• Nitoseal Chamical  two-part pouring grade sealant is formulated from a blend of epoxy and urethane polymers
• The mixed sealant is self levelling and can be poured directly into horizontal joints to form a tough resilient seal possessing a limited degree of flexibility
• Nitoseal Chamical  is available in a range of attractive colours with a separate colour pack providing visual mixing control

• Joints should be designed so that total movement due to concrete shrinkage and thermal change does not exceed the 10% movement accommodation factor related to the joint width
• We would recommend that joints to be sealed with Nitoseal Chamical are left till the final stages of construction when internal temperatures have established and initial concrete shrinkage has taken place
• The bulk of concrete shrinkage will take place within the first 28 days therefore sealant works should be delayed for this minimum period

• Nitoseal Chamical is suitable for sealing joints in Concrete, Brickwork, Blockwork, Perimeter sealing around doors and windows, Non-trafficked floor joints

• Excellent adhesion to most common building materials
• Single component with fast rate of cure
• Easy to apply at low temperature
• Can be applied to damp substrates
• Environmentally friendly
• Primer-less for most applications (see “Priming”)
• Available in a range of colours (see “Properties”)
• Isocyanate free technology

• Nitoseal Chamical is a one part, medium modulus sealant based on hybrid modified poly ether technology

• Where shown on the contract documents, the one part sealant shall be Nitoseal Chamical supplied by Fosroc
• It shall provide good UV protection and have a movement accommodation factor of 20%

• Nitoseal Chamical is suitable for sealing movement joints in buildings and civil engineering structures including joints that will be subject to intermittent or permanent immersion

• Reservoirs
• Sewage tanks
• Sea walls
• Basements
• Subways
• Parapets
• Bridges
• Superstructures
• Swimming pools

• Approved for use in contact with potable water
• Meets key international standards
• Resistant to aerobic and anaerobic bacteriological attack
• Exhibits excellent water resistance
• Excellent resistance to dilute acids and alkalis
• Cures to a tough, elastic rubber seal
• Accommodates continuous and pronounced cyclic movement
• High resistance to ageing, reduces physical damage due to climatic extremes
• Single component yet fast rate of cure
• Can be applied to damp substrates
• Isocyanate free technology

• Nitoseal Chamical is a one part medium modulus sealant based on hybrid silyl modified polyether technology
• It has a fast rate of cure and forms a tough, highly durable and water resistant elastomer
• Conforms to the DWI Water Quality Regulations 25(1)(b) for products having a small surface area in contact with water for public supply

• Nitowrap Fosroc Construction is a carbon composite system for strengthening columns and beams and slabs of load bearing structures particularly where improvement to shear strength and deformation characteristics is required
• It is ideal for seismic retrofitting also. Typical applications include piers, columns, beams, slabs, retaining walls, masonry bridges, pipes, chimneys, tunnels and other structures

• Very high strength to thickness or weight ratio Appreciable increase in strength and load carrying capacity without significant increase in dead load Enhanced stiffness, shear & tensile capacities - increased load carrying capacity and better resistance to seismic forces and deflection
• Chemical resistant excellent resistance to acids and alkalis
• Flexible Can be applied on any shape or contour of substrate
• Thin sections Can be effectively used in space- constrained areas
• Creep & Fatigue resistance Ideal for conditions of sustained loading and repeated loading.
• Economical Easy to install, time & labour saving

• Nitowrap Fosroc Construction is a carbon fibre composite wrapping system where Nitowrap Fosroc Construction is used in conjunction with an epoxy sealer cum primer, Nitowrap Fosroc Construction 30 and a high build epoxy saturant Nitowrap Fosroc Construction 410
• The system is protected by a polyurethane top coat of Nitowrap Fosroc Construction 512 in case of atmospherically exposed structures

• Nitowrap Construction is a glass fibre composite system for strengthening columns, beams and slabs of load bearing structures particularly where improvement to shear strength and deformation characteristics is required
• It is ideal for seismic retrofitting also. Typical applications include piers, columns, beams, slabs, retaining walls, masonry bridges, pipes, chimneys, tunnels and other structures

• Very high strength to thickness or weight ratio
• Appreciable increase in strength and load carrying capacity without significant increase in dead load
• Enhanced stiffness, shear & tensile capacities:  increased load carrying capacity and better resistance to seismic forces and deflection
• Chemical resistant: excellent resistance to acids and alkalis
• Flexible: Can be applied on any shape or contour of substrate
• Thin sections: Can be effectively used in space constrained areas
• Economical: Easy to install, time & labour saving

• Nitowrap Construction is a glass fibre composite wrapping system where Nitowrap Construction is used in conjunction with an epoxy sealer cum primer, Nitowrap 30, and a high build epoxy saturant Nitowrap 410
• The system is protected by a polyurethane top coat of Nitowrap 512 in case of atmospherically exposed structures

• Nitozinc Primer is recommended for priming exposed steel reinforcement for use with Fosroc concrete repair mortars
• The product actively resists corrosion within the confines of the repair location and avoids the generation of incipient anodes in immediately adjacent locations
• Nitozinc Primer is compatible with all Renderoc mortars and fluid micro concretes

• Anti corrosive: Active 'Zinc-rich' system combats corrosion by electro chemical means
• Two component product: easy to mix and use
• Timesaving:  Touch dry after 30 to 45 mins
• Excellent adhesion: Exhibits excellent bond strength in cementitious repairs

• Nitozinc Primer is supplied as a two component system based on metallic zinc and epoxy resin which on mixing gives a grey coloured liquid

• Fosroc offers a comprehensive range of high performance, high quality concrete repair and construction products
• In addition, Fosroc offers technical support service to specifiers, end-users and contractors, as well as on-site technical assistance in locations all over the country

• One or two coats of Nitozinc Primer are generally required, dependent largely on the nature and profile of the substrate Nitozinc Primer is recoatable generally between 30 minutes and one hour after the application of first coat
• Application of top coat may also proceed at this time
• At elevated temperatures, the recoatable and overlay times will be reduced
• The minimum application temperature for Nitozinc Primer is 100 C. The local Fosroc office may be consulted for further information

• Patchroc Construction  mortar has been specially designed to provide a very fast set repair in concrete floors and pavements and is particularly useful where traffic must be kept flowing
• Patchroc Construction  mortar will accept pedestrian and vehicular traffic in 2 hours. Patchroc Construction  mortar will be of particular interest to industrial maintenance engineers, transport managers, airport authorities or any place where that pot holes in concrete cause a hazard to pedestrian and wheeled traffic

• Fast setting: Minimum disruption to traffic
• Easy to use: Needs only the addition of water
• Easy to lay: Trowel applied
• Non shrink: Does not crack
• High adhesion: Ensures good bonding to substrate
• Durable: Tough surface - resistant to wear and tear

• Patchroc Construction mortar is supplied as a pre-blended dry powder to which water is added to produce an easily trowellable mortar
• Patchroc Construction mortar is a blend of inorganic cements, modifying additives to control the rate of set and strength gain, plus selected hard wearing aggregates. Patchroc Construction  mortar does not contain calcium chloride
• Patchroc Construction mortar has been designed for the emergency patching of small areas of concrete i.e., individual patches requiring not more than 12 litre yield per 25kg bag of Patchroc mortar
• The blend of cements eliminates shrinkage with the consequent reduction of stress at the bond line. Long lasting adhesion is ensured by the use of Nitobond AR bonding agent

• A technical advisory service is available for onsite assistance in the use of Fosroc product range

• Proofex chamical is a spray applied polymer based waterproofing membrane designed for a range of applications including basements, underground structures, roofing, tunnels, watertanks, pile tops, terraces, balconies and equipment foundations

• Rapid application rate
• Sets instantly on application
• Forms a continuous seamless waterproof membrane
• High bond strength
• High elongation and flexibility
• Excellent crack bridging capability
• Can be used as a curing membrane

• Proofex chamical is a polymer based waterproofing membrane
• The material is spray applied in conjunction with a water soluble catalyst through specifically designed spray equipment
• It can be applied over a variety of surfaces including green concrete

• The waterproofing membrane shall be Proofex chamical, a two part spray applied material for waterproofing concrete using specifically designed spray application equipment
• The coating shall be applied at the recommended coverage rate to provide a nominal dry film thickness of 2 mm in a single coat application
• The cured membrane shall have elognation properties in excess of 2000% with a recovery of 95% at 350% elognation and have crack bridging capability of 10mm to withstand movement within the concrete

• Concrete roof and floor slabs
• Basement tankings
• Car park deck slabs
• Concrete retaining structures
• Tunnels and subways

• High strength reinforcement gives excellent resistance to puncture and stress
• Easily torch applied
• Bonds well to the substrate
• Readily formed to contours

• Proofex Torchseal 3P and 4P are quality torch applied APP based membranes manufactured from premium grade heavily modified bitumen, reinforced with a core of non-woven polyester fabric, weighing 180g/m², rot-proof and is malleable
• The core gives the membrane its excellent mechanical properties, allows for good elongation and affords high resistance to piercing
• Proofex Torchseal 3P and 4P membranes are ideal for use in a wide range of waterproofing applications such as foundations, basements, tunnels, roofs, carpark decks and other civil works. The chemical resistance of Proofex Torchseal 3P and 4P makes it particularly suitable for tanking applications in areas where aggresive ground water conditions prevail
• Slated surface (3 mm / 4mm) Aluminium faced range (3mm / 4mm) and double reinforced torch membranes are also available

• The waterproofing membrane shall be a high performance APP based torch applied 3mm / 4mm thick membrane, manufactured from high quality polymer - modified bituminous compounds and reinforced with non woven polyster fabric, weighing 180g/m²

• Integral sealing for construction joints in concrete cast in-situ where conventional water stops are impractical to use because of limited access
• Convenient and problem solving in situations where a conventional water stop would require complex shuttering Typical uses include secant piled and diaphragm walled basements, pile caps and casting against old concrete
• Supercast Chemical  can provide simple solutions to detailing pipe entries, construction joints in the vertical plane and to kicker joints
• Can be linked to Supercast Chemical water stops to give an effective combination of water stops which maintain network continuity

• Easy to install by bonding, nailing or casting into joint faces
• Factory made connectors enable full integration of
• Supercast Chemical and Supercast Chemical PVC networks
• Solves detailing problems in conjunction with Supercast Chemical
• PVC range
• Swelling properties unaffected by long term wet/dry cycling
• Tolerant of salts present in concrete and groundwater
• Sustains effective seal in wet conditions

• Sealing around joints in precast manhole covers, cable ducts and pipes etc.
• Sealing around precast segments
• Sealing between rough surfaces, e.g. slurry walls and concrete slabs
• Sealing around H-beams and other penetrations through concrete structures
• Sealing around conventional rubber and plastic water stops to provide ‘belt or braces’ seal prior to concrete pour

• Fast curing: Enables early concrete pour and rapid return to service. Allows hand-applied concrete cover within 2 hours on emergency repairs and large-scale concrete pour after 8 hours
• Excellent seal on rough concrete: Gives improved water tightness. Plugs inequalities in rough concrete to product a tight seal
• Excellent adhesion: Quick and easy to apply to a variety of damp and uneven joint surfaces remaining firmly in place during concrete pour
• Water swell-able: Expands by 200% producing a watertight compression seal
• Durable: Excellent wet/dry cycling retaining character and swelling performance due to high tolerance of the environment

• Supercast Chemical is a grey, water-spellable paste which is applied like a sealant
• The Hydrophilic properties of Supercast Chemical display good consistency in swell rate during repeated wet/dry cycling
• Expansion of the product on contact with water creates a positive pressure against the faces of the concrete joint, thus preventing the passage of water

• For patching and replacement of worn out areas, filling of holes or depressions in concrete floor slabs in factories, go downs, commercial or domestic buildings

• High strength: Nearly three times harder than the normal concrete
• Non shrink:  Eliminates shrinkage problems associated with conventional cement concrete / mortars and ensures effective bonding
• Reliability: Factory controlled prepacked product eliminates material selection, quality control and other associated problems on site
• Durability: Very high ultimate strengths combined with a uniform micro cellular material structure provides heavy duty performance and durability
• Early usage: Floor usable in 24 hours for light traffic and in 72 hours for all traffic
• Iron free, chloride free: No metallic iron present to corrode and cause staining or deterioration due to rust expansion
• Allows early strength development without the use of chlorides

• Super patch mortar is supplied as a ready to use dry powder requiring only the addition of water to produce a high strength mortar with non shrink property
• The material is a mixture of specially processed cement and carefully graded fine aggregate
• Additives impart controlled expansion characteristics and reduce water necessary to produce cohesive mortar mix
• The very low water/powder ratio (0.14) ensures high early and ultimate strengths
• For repairing thick sections of more than 25mm depth it is necessary to use well graded aggregates (machine crushed, washed and cleaned) in the size range of 3mm to 10mm
• Quantity of aggregates should not exceed 1 part of graded aggregate to 1 part of Super patch by weight in which case the water/powder ratio will need to be increased to 0.18

• A technical advisory service is available for onsite assistance in the use of Fosroc product range

• Thioflex Chemical is a two part sealant based on a liquid poly sulphide polymer
• This is available in two grades Gun grade and Pourable grade
• Thioflex Chemical PG is a Pourable version designed for use in horizontal joints
• Adhesion is excellent to most common building substrates
• The product is particularly recommended for sealing horizontal structural expansion joints in most civil engineering structures like building superstructures, subways, basements, floors and reservoirs

• Forms a tough elastic rubber-like seal
• Accommodates continuous and pronounced cyclic movement
• Excellent adhesion to most common substrates
• High resistance to aging influences, physical  damage and climatic extremes