Protective Coating

Product Details:

Nitocote Wallguard White Base (1 lt./4 lt./20 lt.)

Uses

• Provides a high quality effective waterproofing cum decorative coating for exterior wall.
• Prevents dampness of external wall subjected to severe weather in coastal environment.
• Ideally suitable for coating on all type of external masonry surfaces, concrete, cement sand renderings etc. Advantages
• High build film - Higher film thickness provides tough waterproof membrane ensuring no ingress of water with- -standing wind driven rain.
• Highly flexible - Accommodates movement in the structure covers hairline cracks(upto 0.5 mm).
• Elongation - Easily accomodates movement of thermal expansion & contraction.100% elongation at 110-120 micron DFT crack bridging in excess of 0.5mm.
• Ready to use – Dilution is not required.
• UV stability – Resistance to UV rays.
• Anti dirt – low dirt pick up & can be cleaned easily.
• Breathability – Allow internal moisture to escape.
• Ease of application – User friendly product, easily applicable by brush, roller or spray.

Product Details:

Elastomeric & Decorative acrylic waterproofing coating for exterior walls
Description
Nitocote Wall Guard is water based polymer coating composed of high quality acrylic polymer, with weather resistant pigments, properly selected & graded fine fillers. It is used as a waterproofing & decorative coating for protection of exterior walls of the buildings from heavy wind driven rain. 
Uses:
??? Provides a high quality effective waterproofing cum decorative coating for exterior wall.
??? Prevents dampness of external wall subjected to severe weather in coastal environment.
??? Ideally suitable for coating on all type of external masonry surfaces, concrete, cement sand renderings etc. 
Advantages
??? High build film - Higher film thickness provides tough waterproof membrane ensuring no ingress of water with- -standing wind driven rain.
??? Highly flexible - Accommodates movement in the structure covers hairline cracks(upto 0.5 mm).
??? Elongation - Easily accomodates movement of thermal expansion & contraction.100% elongation at 110-120 micron DFT crack bridging in excess of 0.5mm.
??? Ready to use – Dilution is not required. ??? UV stability – Resistance to UV rays. ??? Anti dirt – low dirt pick up & can be cleaned easily.
??? Breathability – Allow internal moisture to escape.
??? Ease of application – User friendly product, easily applicable by brush, roller or spray.
Specification Clause: Waterproof coating for external masonry/rcc walls shall be Nitocote Wall Guard an acrylic water based elastomeric & decorative coating applied at 110 micron DFT in two coats as per manufacturer specification. Coating shall be UV resistant, breathable & flexible having minimum 100% elongation when applied at 110 micron DFT

Limitations
Minimum ambient surface and material temperature must be between 10 to 400C. For applications outside this range, contact Fosroc for advise. Application of the product should be always on dry substrates.

Health & Safety Nitocote Wall Guard should not come in contact with the skin and eyes, or be swallowed. Adequate ventilation should be ensured and inhalation of vapours should be avoided. Some people are sensitive to polymers, hence suitable protective clothing, gloves and eye protection should be worn. If working in confined areas, suitable respiratory protective equipment must be used. In case of contact with skin, should be rinsed immediately with plenty of clean water and medical advice sought. If swallowed, medical attention sought immediately.Should not induce vomiting.

Additional Information:

• Packaging Details: Nitocote Wall Guard White base : 20, 4 &1 litres Nitocote Wall Guard Dark base : 19, 3.8 & 0.95 litres Nitocote Wall Guard Midtone base : 19, 3.8 & 0.95 litres

Uses To protect atmospherically exposed reinforced con crete structures from attack by acid gases, chloride ions, sulphates, oxygen and water. The product is also suitable to protect other cementitious substrate and masonry. Dekguard S is suitable for use on all types of structures, especially those in aggressive marine and coastal environments. Dekguard S is a component of Fosroc's Renderoc system of concrete reinstatement. Advantages „ Excellent barrier to carbon dioxide, chloride ions, sulphates, oxygen and water „ Allows water vapour to escape from the structure „ Highly UV resistant aliphatic acrylate gives exceptional resistance to the effects of long term weathering. „ Highly durable in all climatic conditions. „ Selected range of decorative colours „ Ease of application - single pack - no mixing of separate components.

Additional Information:

• Minimum Order Quantity: 1 Litre

Product Details:

Uses To protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, sulphates, oxygen and water. The product is also suitable to protect other cementitious substrates and masonry. Dekguard S is suitable for use on all types of structures, especially those in aggressive marine and coastal environments. It is equally suitable for new and existing structures. Dekguard S is a component of the Renderoc system of concrete reinstatement.

Advantages

•  Excellent barrier to carbon dioxide, chloride ions, sulphates, oxygen and water
•  Allows water vapour to escape from the structure
•  Highly UV-resistant aliphatic acrylic gives exceptional resistance to the effects of long-term weathering
•  Highly durable in all climatic conditions
•  Wide range of decorative colours
•  Excellent resistance to dirt pick-up.

Uses Provides passivating protection matrix to reinforcing steel Advantages „ Anticorrosive - protects from future corrosion „ High adhesion - excellent bonding to all types of steel substrate „ Cement based - compatible with concrete „ User friendly - can be easily applied by brush Description Nitocote AP35, a single component latex acyrlic polymer based emulsion is used for protecting steel reinforcement from corrosion. It only needs to be mixed with cement at site to produce an easily brushable coating. Technical support Fosroc offers a technical support service to specifiers, end users and contractors, as well as on-site technical assistance in locations all over the country.

Additional Information:

• Minimum Order Quantity: 1 Litre

Product Details:

Uses Nitocote EP140 is used as a hygienic and chemical resistant coating for steel tanks, concrete walls, concrete and metal columns, sluices and ducts. Advantages „ Excellent adhesion - Compatible with all substrates. Can be applied directly on to mild steel and concrete „ Hygienic & Aesthetic – Forms a smooth, glossy and easy to clean surface on curing „ Chemical resistant – Proven against a wide range of industrial chemicals Description Nitocote EP140 coating is based on solvented epoxy resins specially formulated to provide a durable coating suitable for application to both vertical and horizontal surfaces. It cures to form a smooth hygienic film with good resistance to a wide range of mineral and organic acids, fats, alkalis and oils.

NITOCOTE SN522 (Packing Available In 1 lt./5 lt./20 lt.)

Uses Nitocote SN522 water repellent, is used to provide water repellent surface with improved self cleaning properties on exterior building - brick work, concrete, cement rendering, natural or cast stone. Helps in reducing efflorescence due to soluble salts in brickwork. Advantages „ Ready to use : Brush or spray applied direct from container. „ Versatile: Equally effective on old or new surfaces. „ Self-cleaning : Unaffected by salt-laden atmosphere, reduces unsightly staining. „ Protects brickwork: Risk of efflorescence is reduced. „ Protects concrete: Reduces causes of cracking and crazing in in-situ or precast concrete „ Colourless: Preserves natural colour and texture of created material. Allows surface to breathe.

Additional Information:

• Minimum Order Quantity: 1 Litre

Uses Nitozinc Primer is recommended for priming exposed steel reinforcement for use with Fosroc concrete repair mortars. The product actively resists corrosion within the confines of the repair location and avoids the generation of incipient anodes in immediately adjacent locations. Nitozinc Primer is compatible with all Renderoc mortars and fluid micro concretes. Advantages Anti corrosive - Active 'Zinc-rich' system combats corrosion by electro chemical means. Two component product - easy to mix and use. Timesaving - Touch dry after 30 to 45 mins. Excellent adhesion - Exhibits excellent bond strength in cementitious repairs.

Additional Information:

• Minimum Order Quantity: 1 Litre

Uses Nitozinc Primer is recommended for priming exposed steel reinforcement for use with Fosroc concrete repair mortars. The product actively resists corrosion within the confines of the repair location and avoids the generation of incipient anodes in immediately adjacent locations. Nitozinc Primer is compatible with all Renderoc mortars and fluid micro concretes. Advantages Anti corrosive - Active 'Zinc-rich' system combats corrosion by electro chemical means. Two component product - easy to mix and use. Timesaving - Touch dry after 30 to 45 mins. Excellent adhesion - Exhibits excellent bond strength in cementitious repairs.

Additional Information:

• Minimum Order Quantity: 1 Litre

Uses To protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, sulphates, oxygen and water. The product is also suitable to protect other cementitious substrates and masonry. Dekguard S is suitable for use on all types of structures, especially those in aggressive marine and coastal environments. It is equally suitable for new and existing structures. Dekguard S is a component of the Renderoc system of concrete reinstatement.

Advantages

•  Excellent barrier to carbon dioxide, chloride ions, sulphates, oxygen and water
•  Allows water vapour to escape from the structure
•  Highly UV-resistant aliphatic acrylic gives exceptional resistance to the effects of long-term weathering
•  Highly durable in all climatic conditions
•  Wide range of decorative colours
•  Excellent resistance to dirt pick-up.

Additional Information:

• Minimum Order Quantity: 1 Litre